Cy7 NHS ester
Based on 2 publication(s) in Google Scholar
Cy7 NHS ester is a fluorescent dye that can be used for fluorescent imaging study.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté : 98.06%
- CAS No.: 1432019-64-1
- Formule: C41H48ClN3O4
- Masse moléculaire:682.29
-
Stockage:
-20°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Activité biologique
Description
In Vitro
Guide (The following is our recommended protocol. This protocol is only a guide and should be modified according to your specific needs).
1. Protein Preparation
To obtain the best labeling effect, please prepare the protein (antibody) concentration to 2 mg/mL.
1.1 The pH value of the protein solution should be 8.5 ± 0.5. If the pH is lower than 8.0, adjust it with 1 M sodium bicarbonate.
1.2 If the protein concentration is lower than 2 mg/mL, the labeling efficiency will be greatly reduced. To obtain the best labeling efficiency, it is recommended that the final protein concentration range be 2-10 mg/mL.
1.3 The protein must be in a buffer free of primary amines (such as Tris or glycine) and ammonium ions, otherwise the labeling efficiency will be affected.
2. Dye Preparation
Dilute the dye with anhydrous DMSO to prepare a clear stock solution of 10 mg/mL.
3. Calculation of Dye Amount
The amount of dye required for the reaction depends on the amount of protein to be labeled. The optimal molar ratio of dye to protein is approximately 10:1.
Example: Assuming the required labeled protein is 500 μL 2 mg/mL IgG (MW=150,000), and 1 mg of dye is dissolved in 100 μL DMSO, the required dye volume is 4.6 μL. The detailed calculation process is as follows:
1) mmol (IgG) = mg/mL (IgG) × mL (IgG)/MW (IgG) = 2 mg/mL × 0.5 mL/150,000 mg/mmol = 6.7 × 10-6 mmol
2) mmol (dye) = mmol (IgG) × 10 = 6.7 × 10-6 mmol × 10 = 6.7 × 10-5 mmol
3) μL (dye) = mmol (dye) × MW (dye)/mg/μL (dye) = 6.7 ×10-5 mmol ×682.29 mg/mmol/0.01 mg/μL = 4.6 μL (dye)
Note: We recommend using a dye:protein molar ratio of 10:1. If the concentration is too low or too high, the ratio can be adjusted to 5:1, 15:1, or 20:1.
4. Running the Coupling Reaction
1) Slowly add the calculated volume of freshly prepared 10 mg/mL dye to 0.5 mL of protein sample solution, gently shake to mix, and then briefly centrifuge to collect the sample at the bottom of the reaction tube. Avoid vigorous mixing to prevent denaturation and inactivation of the protein sample.
2) Place the reaction tube in a dark place and incubate gently with shaking for 60 minutes at room temperature. Every 10-15 minutes, gently invert the reaction tube several times to thoroughly mix the reactants and improve labeling efficiency.
5. Purification of Conjugates
The following protocol is an example of purifying dye-protein conjugates using a Labelling Kits Centrifugation-Based Rapid Desalting Column (5KD) (HY-D3014).
5.1 Prepare the desalting column according to the instructions.
5.2 Load the reaction mixture onto the top of the desalting column.
5.3 Once the sample has run below the resin surface, immediately add PBS (pH 7.2-7.4).
5.4 Add more PBS (pH 7.2-7.4) to the target sample to complete column purification. Collect the fraction containing the desired dye-protein conjugate.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 1432019-64-1
-
Appearance Solid
-
Masse moléculaire 682.29
-
Formule C41H48ClN3O4
-
Color Purple to purplish red
-
SMILES
O=C(CCCCC[N+]1=C(/C=C/C2=C/C(CCC2)=C/C=C3N(C)C4=C(C\3(C)C)C=CC=C4)C(C)(C)C5=C1C=CC=C5)ON6C(CCC6=O)=O.[Cl-]
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
-20°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Publications (2)
-
Journal Impact Factor
-
Most Recent
-
Sci Adv
Mucoadhesive tumor-penetrating nanomedicine for intravesical chemo-immunotherapy against bladder cancer. [Abstract]2026 Apr 17;12(16):eaeb9764. PMID: 41984946 -
J Med Chem
Dual-Functional Anti-SIRPα-cGAMP Conjugate Reprograms the Tumor Immune Microenvironment and Enhances Antitumor Immunity. [Abstract]2026 Apr 23;69(8):9603-9614. PMID: 41918375
Solvant et solubilité
In Vitro:
DMSO : 100 mg/mL (146.57 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
Pureté et documentation
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.4657 mL | 7.3283 mL | 14.6565 mL | 36.6413 mL |
| 5 mM | 0.2931 mL | 1.4657 mL | 2.9313 mL | 7.3283 mL | |
| 10 mM | 0.1466 mL | 0.7328 mL | 1.4657 mL | 3.6641 mL | |
| 15 mM | 0.0977 mL | 0.4886 mL | 0.9771 mL | 2.4428 mL | |
| 20 mM | 0.0733 mL | 0.3664 mL | 0.7328 mL | 1.8321 mL | |
| 25 mM | 0.0586 mL | 0.2931 mL | 0.5863 mL | 1.4657 mL | |
| 30 mM | 0.0489 mL | 0.2443 mL | 0.4886 mL | 1.2214 mL | |
| 40 mM | 0.0366 mL | 0.1832 mL | 0.3664 mL | 0.9160 mL | |
| 50 mM | 0.0293 mL | 0.1466 mL | 0.2931 mL | 0.7328 mL | |
| 60 mM | 0.0244 mL | 0.1221 mL | 0.2443 mL | 0.6107 mL | |
| 80 mM | 0.0183 mL | 0.0916 mL | 0.1832 mL | 0.4580 mL | |
| 100 mM | 0.0147 mL | 0.0733 mL | 0.1466 mL | 0.3664 mL |