Cys-mcMMAD
Based on 1 Customer Validation
Cys-mcMMAD is a agent-linker conjugate for ADC. MMAD is a potent tubulin inhibitor.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 98.77%
- Formel: C54H84N8O11S2
- Molecular Weight:1085.42
-
Speicherung:
-20°C, protect from light
* The compound is unstable in solutions, freshly prepared is recommended.
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Alle Drug-Linker Conjugates for ADC Isoform-spezifische Produkte anzeigen
More
Biologische Aktivität
|
Auristatin |
Chemical Information
-
Appearance Solid
-
Molecular Weight 1085.42
-
Formel C54H84N8O11S2
-
Color White to off-white
-
SMILES
CC[C@H](C)[C@@H]([C@@H](CC(N1[C@@H](CCC1)[C@@H]([C@@H](C)C(N[C@H](C2=NC=CS2)CC3=CC=CC=C3)=O)OC)=O)OC)N(C([C@H](C(C)C)NC([C@H](C(C)C)N(C(CCCCCN4C(CC(SC[C@@H](C(O)=O)N)C4=O)=O)=O)C)=O)=O)C
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
-20°C, protect from light
* The compound is unstable in solutions, freshly prepared is recommended.
Lösungsmittel & Löslichkeit
DMSO : 200 mg/mL (184.26 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. The compound is unstable in solutions, freshly prepared is recommended.
Please refer to the solubility information to select the appropriate solvent. The compound is unstable in solutions, freshly prepared is recommended.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5 mg/mL (4.61 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 5 mg/mL (4.61 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * The compound is unstable in solutions, freshly prepared is recommended.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (271 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. The compound is unstable in solutions, freshly prepared is recommended.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 0.9213 mL | 4.6065 mL | 9.2130 mL | 23.0326 mL |
| 5 mM | 0.1843 mL | 0.9213 mL | 1.8426 mL | 4.6065 mL | |
| 10 mM | 0.0921 mL | 0.4607 mL | 0.9213 mL | 2.3033 mL | |
| 15 mM | 0.0614 mL | 0.3071 mL | 0.6142 mL | 1.5355 mL | |
| 20 mM | 0.0461 mL | 0.2303 mL | 0.4607 mL | 1.1516 mL | |
| 25 mM | 0.0369 mL | 0.1843 mL | 0.3685 mL | 0.9213 mL | |
| 30 mM | 0.0307 mL | 0.1536 mL | 0.3071 mL | 0.7678 mL | |
| 40 mM | 0.0230 mL | 0.1152 mL | 0.2303 mL | 0.5758 mL | |
| 50 mM | 0.0184 mL | 0.0921 mL | 0.1843 mL | 0.4607 mL | |
| 60 mM | 0.0154 mL | 0.0768 mL | 0.1536 mL | 0.3839 mL | |
| 80 mM | 0.0115 mL | 0.0576 mL | 0.1152 mL | 0.2879 mL | |
| 100 mM | 0.0092 mL | 0.0461 mL | 0.0921 mL | 0.2303 mL |
Cys-mcMMAD Related Classifications
HY-15750 Related Classifications
Powered by Bioz