Matairesinoside
Based on 1 publication(s) in Google Scholar
Matairesinoside is a lignan with antibacterial and antioxidant activities. Matairesinoside also shows virus-cell fusion inhibitory activity.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.88%
- CAS No.: 23202-85-9
- Formule: C26H32O11
- Masse moléculaire:520.53
-
Stockage:
-20°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Publications Citing Use of MedChemExpress (MCE) Matairesinoside
More
Activité biologique
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| H9 | IC50 |
>192 μM
Compound: 3
|
Cytotoxicity against human H9 cells
Cytotoxicity against human H9 cells
|
[PMID: 11473435] |
| RAW264.7 | IC50 |
>0.3 mM
Compound: 25
|
Antiinflammatory activity in mouse RAW264.7 cells assessed as inhibition of LPS-induced nitric oxide production after 24 hrs
Antiinflammatory activity in mouse RAW264.7 cells assessed as inhibition of LPS-induced nitric oxide production after 24 hrs
|
[PMID: 18986199] |
| RAW264.7 | IC50 |
>0.3 μM/mL
Compound: 25
|
Antiinflammatory activity in mouse RAW264.7 cells assessed as inhibition of LPS-induced nitric oxide production after 24 hrs
Antiinflammatory activity in mouse RAW264.7 cells assessed as inhibition of LPS-induced nitric oxide production after 24 hrs
|
[PMID: 18986199] |
Matairesinoside shows high virus-cell fusion inhibitory activity with the fusion inhibition of 46.7%[1].
Matairesinoside shows prominent free radical scavenging activity in the DPPH assay, with the IC50 is 2.19 μg/mL[2].
Matairesinoside is most active against Pseudomonas aeruginosa (MIC of 0.001 mg/mL)[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 23202-85-9
-
Appearance Solid
-
Masse moléculaire 520.53
-
Formule C26H32O11
-
Color White to off-white
-
SMILES
COC(C=C1C[C@@H](C(OC2)=O)[C@H]2CC3=CC(OC)=C(C=C3)O)=C(C=C1)O[C@@H]4O[C@@H]([C@H]([C@@H]([C@H]4O)O)O)CO
-
Structure Classification
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
-20°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Comput Biol Chem
Targeting quorum sensing in Pseudomonas aeruginosa with high-affinity inhibitors: A high-throughput screening and in-silico analysis. [Abstract]2025 Aug:117:108419. PMID: 40088808
Solvant et solubilité
DMSO : 100 mg/mL (192.11 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (4.80 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (4.80 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (277 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.9211 mL | 9.6056 mL | 19.2112 mL | 48.0280 mL |
| 5 mM | 0.3842 mL | 1.9211 mL | 3.8422 mL | 9.6056 mL | |
| 10 mM | 0.1921 mL | 0.9606 mL | 1.9211 mL | 4.8028 mL | |
| 15 mM | 0.1281 mL | 0.6404 mL | 1.2807 mL | 3.2019 mL | |
| 20 mM | 0.0961 mL | 0.4803 mL | 0.9606 mL | 2.4014 mL | |
| 25 mM | 0.0768 mL | 0.3842 mL | 0.7684 mL | 1.9211 mL | |
| 30 mM | 0.0640 mL | 0.3202 mL | 0.6404 mL | 1.6009 mL | |
| 40 mM | 0.0480 mL | 0.2401 mL | 0.4803 mL | 1.2007 mL | |
| 50 mM | 0.0384 mL | 0.1921 mL | 0.3842 mL | 0.9606 mL | |
| 60 mM | 0.0320 mL | 0.1601 mL | 0.3202 mL | 0.8005 mL | |
| 80 mM | 0.0240 mL | 0.1201 mL | 0.2401 mL | 0.6003 mL | |
| 100 mM | 0.0192 mL | 0.0961 mL | 0.1921 mL | 0.4803 mL |