EGFR/HER2-IN-9
Based on 1 Customer Validation
EGFR/HER2-IN-9 (Compound 1) is an EGFR and HER2 inhibitor with IC50s of 3.2, 8.3 and 14 nM against EGFR, EGFR T790M and HER2, respectively.
For research use only. We do not sell to patients.
- Purity: 98.73%
- CAS No.: 1637253-79-2
- Formula: C25H25ClFN5O4
- Molecular Weight:513.95
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
All EGFR Isoforms
More
Biological Activity
|
EGFR 3.2 nM (IC50) |
EGFRT790M 8.3 nM (IC50) |
HER2 14 nM (IC50) |
Chemical Information
-
CAS No. 1637253-79-2
-
Appearance Solid
-
Molecular Weight 513.95
-
Formula C25H25ClFN5O4
-
Color Off-white to light yellow
-
SMILES
COC(C(NC(/C=C/CN1C[C@@]2([H])[C@@](OCCO2)([H])C1)=O)=C3)=CC4=C3C(NC5=CC(Cl)=C(C=C5)F)=NC=N4
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 100 mg/mL (194.57 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 2.5 mg/mL (4.86 mM); Clear solution; Need ultrasonic
This protocol yields a clear solution of 2.5 mg/mL.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (274 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.9457 mL | 9.7286 mL | 19.4571 mL | 48.6429 mL |
| 5 mM | 0.3891 mL | 1.9457 mL | 3.8914 mL | 9.7286 mL | |
| 10 mM | 0.1946 mL | 0.9729 mL | 1.9457 mL | 4.8643 mL | |
| 15 mM | 0.1297 mL | 0.6486 mL | 1.2971 mL | 3.2429 mL | |
| 20 mM | 0.0973 mL | 0.4864 mL | 0.9729 mL | 2.4321 mL | |
| 25 mM | 0.0778 mL | 0.3891 mL | 0.7783 mL | 1.9457 mL | |
| 30 mM | 0.0649 mL | 0.3243 mL | 0.6486 mL | 1.6214 mL | |
| 40 mM | 0.0486 mL | 0.2432 mL | 0.4864 mL | 1.2161 mL | |
| 50 mM | 0.0389 mL | 0.1946 mL | 0.3891 mL | 0.9729 mL | |
| 60 mM | 0.0324 mL | 0.1621 mL | 0.3243 mL | 0.8107 mL | |
| 80 mM | 0.0243 mL | 0.1216 mL | 0.2432 mL | 0.6080 mL | |
| 100 mM | 0.0195 mL | 0.0973 mL | 0.1946 mL | 0.4864 mL |