Hidrosmin (mixture)
Based on 1 Customer Validation
Hidrosmin (mixture) is a mixture of 3,5-di-O-(hydroxyethyl)diosmin and 3'-mono-O-(hydroxyethyl)diosmin.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 89.70%
- No. CAS: 115960-14-0
- Fòrmula: C30H36O16
- Peso molecular:652.60
-
Almacenamiento:Powder -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
-
Help & FAQs
Actividad biológica
Chemical Information
-
No. CAS 115960-14-0
-
Appearance Solid
-
Peso molecular 652.60
-
Fòrmula C30H36O16
-
Color Light yellow to yellow
-
SMILES
OCCOC1=C2C(OC(C3=CC(O)=C(C=C3)OC)=CC2=O)=CC(O[C@@H]4O[C@@H]([C@H]([C@@H]([C@H]4O)O)O)CO[C@H]5[C@@H]([C@@H]([C@H]([C@@H](O5)C)O)O)O)=C1
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Powder -20°C 3 years In solvent -80°C 6 months -20°C 1 month
Solvente y solubilidad
DMSO : 100 mg/mL (153.23 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 25 mg/mL (38.31 mM; Need ultrasonic)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (3.83 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (3.83 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Pureza y Documentación
-
Ficha de datos (243 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instrucciones de manejo (2659 KB)
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 1.5323 mL | 7.6617 mL | 15.3233 mL | 38.3083 mL |
| 5 mM | 0.3065 mL | 1.5323 mL | 3.0647 mL | 7.6617 mL | |
| 10 mM | 0.1532 mL | 0.7662 mL | 1.5323 mL | 3.8308 mL | |
| 15 mM | 0.1022 mL | 0.5108 mL | 1.0216 mL | 2.5539 mL | |
| 20 mM | 0.0766 mL | 0.3831 mL | 0.7662 mL | 1.9154 mL | |
| 25 mM | 0.0613 mL | 0.3065 mL | 0.6129 mL | 1.5323 mL | |
| 30 mM | 0.0511 mL | 0.2554 mL | 0.5108 mL | 1.2769 mL | |
| DMSO | 40 mM | 0.0383 mL | 0.1915 mL | 0.3831 mL | 0.9577 mL |
| 50 mM | 0.0306 mL | 0.1532 mL | 0.3065 mL | 0.7662 mL | |
| 60 mM | 0.0255 mL | 0.1277 mL | 0.2554 mL | 0.6385 mL | |
| 80 mM | 0.0192 mL | 0.0958 mL | 0.1915 mL | 0.4789 mL | |
| 100 mM | 0.0153 mL | 0.0766 mL | 0.1532 mL | 0.3831 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Hidrosmin (mixture) Related Classifications
HY-105946A Related Classifications
Powered by Bioz