Sulfopin
Based on 3 publication(s) in Google Scholar
Sulfopin (PIN1-3) is a highly selective covalent inhibitor of Pin1 with an apparent Ki of 17 nM. Sulfopin blocks Myc-driven tumors in vivo. The peptidyl-prolyl isomerase, Pin1, is exploited in cancer to activate oncogenes and inactivate tumor suppressors.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 99.82%
- No. CAS: 2451481-08-4
- Fòrmula: C11H20ClNO3S
- Peso molecular:281.81
-
Almacenamiento:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
- Referencias
-
Help & FAQs
-
PI3K/Akt/mTOR Compound Library
HY-L015
-
Anti-Cancer Compound Library
HY-L025
-
Anti-Aging Compound Library
HY-L034
-
Oxygen Sensing Compound Library
HY-L045
-
Glycolysis Compound Library
HY-L058
-
Cytoskeleton Compound Library
HY-L060
-
Anti-Pancreatic Cancer Compound Library
HY-L077
-
Anti-Cancer Metabolism Compound Library
HY-L083
-
Transcription Factor-Targeted Library
HY-L090
-
Glucose Metabolism Compound Library
HY-L092
-
Targeted Diversity Library
HY-L099
-
Heterocyclic Compound Library
HY-L138
-
Cysteine Targeted Covalent Library
HY-L153
-
Cysteine Targeted Covalent Fragment Library
HY-L154
-
Highly Selective Inhibitors Library
HY-L158
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
-
3D Diverse Fragment Library
HY-L903
Publications Citing Use of MedChemExpress (MCE) Sulfopin
More
Actividad biológica
MDA-MB-468 cells show the most pronounced sensitivity to Sulfopin (1, 2.5 μM; 4-8 days)[1].
Sulfopin (2 μM, HEK293 cells; 48 hours) downregulates Myc transcription[1].
Sulfopin (1, 2.5 μM; PATU-8988T cells; 4 days) shows a small but significant reduction in the number of synthesis (S)-phase cells and a corresponding increase of growth 1 (G1)-phase cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:Kuramochi, MDA-MB-468, NGP, NBL-S, MDA-MB-468 cells
-
Concentration:1, 2.5 μM
-
Incubation Time:4,6, 8 days
-
Result:Showed variation in antiproliferative effects across cancer cell lines Kuramochi, MDA-MB-468, NGP and NBL-S, with the most pronounced sensitivity observed in MDA-MB-468 cells.
Sulfopin (20-40 mg/kg; i.p.; daily for 27 days) inhibits pancreatic cancer progression in mice[1].
Sulfopin (25-100 μM) blocks neuroblastoma in zebrafish[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Transgenic Th-MYCN mice[1]
-
Dosage:40 mg/kg
-
Administration:Once a day (QD) or twice a day (BID) for 7 days
-
Result:Sulfopin-treated QD mice showed a significant average increase in survival of 10 days, while Sulfopin-treated BID mice showed an even more pronounced average increase of 28 days.
Chemical Information
-
No. CAS 2451481-08-4
-
Appearance Solid
-
Peso molecular 281.81
-
Fòrmula C11H20ClNO3S
-
Color White to off-white
-
SMILES
O=C(N(CC(C)(C)C)C(CC1)CS1(=O)=O)CCl
-
Synonyms
PIN1-3
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (3)
-
Journal Impact Factor
-
Most Recent
-
Blood Adv
2023 Feb 28;7(4):469-481. PMID: 35917568 -
Pharmaceutics
Systematic Optimization of Proteolysis-Targeting Chimeras for PIN1 Enables Selective Degradation and Antitumor Activity In Vivo. [Abstract]2026 Feb 26;18(3):288. PMID: 41900774 -
J Proteome Res
2024 Nov 1;23(11):5153-5165. PMID: 39380184
Solvente y solubilidad
DMSO : 100 mg/mL (354.85 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 4.35 mg/mL (15.44 mM; ultrasonic and warming and heat to 60°C)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (8.87 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (8.87 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (278 KB)
-
SDS (614 KB)
- English - EN (614 KB)
- Français - FR (614 KB)
- Deutsch - DE (614 KB)
- Norwegian - NO (614 KB)
- Español - ES (614 KB)
- Swedish - SV (614 KB)
- Italian - IT (614 KB)
- Korean - KR (614 KB)
- Portuguese - PT (614 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 3.5485 mL | 17.7425 mL | 35.4849 mL | 88.7123 mL |
| 5 mM | 0.7097 mL | 3.5485 mL | 7.0970 mL | 17.7425 mL | |
| 10 mM | 0.3548 mL | 1.7742 mL | 3.5485 mL | 8.8712 mL | |
| 15 mM | 0.2366 mL | 1.1828 mL | 2.3657 mL | 5.9142 mL | |
| DMSO | 20 mM | 0.1774 mL | 0.8871 mL | 1.7742 mL | 4.4356 mL |
| 25 mM | 0.1419 mL | 0.7097 mL | 1.4194 mL | 3.5485 mL | |
| 30 mM | 0.1183 mL | 0.5914 mL | 1.1828 mL | 2.9571 mL | |
| 40 mM | 0.0887 mL | 0.4436 mL | 0.8871 mL | 2.2178 mL | |
| 50 mM | 0.0710 mL | 0.3548 mL | 0.7097 mL | 1.7742 mL | |
| 60 mM | 0.0591 mL | 0.2957 mL | 0.5914 mL | 1.4785 mL | |
| 80 mM | 0.0444 mL | 0.2218 mL | 0.4436 mL | 1.1089 mL | |
| 100 mM | 0.0355 mL | 0.1774 mL | 0.3548 mL | 0.8871 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Sulfopin Related Classifications
HY-139361 Related Classifications
Powered by Bioz