Ethaboxam
Based on 1 Customer Validation
Ethaboxam is a β-tubulin inhibitor that can be used as anti-oomycete fungicide.
For research use only. We do not sell to patients.
- Purity: 99.22%
- CAS No.: 162650-77-3
- Formula: C14H16N4OS2
- Molecular Weight:320.43
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
Biological Activity
Chemical Information
-
CAS No. 162650-77-3
-
Appearance Solid
-
Molecular Weight 320.43
-
Formula C14H16N4OS2
-
Color White to off-white
-
SMILES
N#CC(C1=CC=CS1)NC(C2=C(CC)N=C(NCC)S2)=O
-
Synonyms
Intego solo
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 100 mg/mL (312.08 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (7.80 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (271 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.1208 mL | 15.6040 mL | 31.2081 mL | 78.0202 mL |
| 5 mM | 0.6242 mL | 3.1208 mL | 6.2416 mL | 15.6040 mL | |
| 10 mM | 0.3121 mL | 1.5604 mL | 3.1208 mL | 7.8020 mL | |
| 15 mM | 0.2081 mL | 1.0403 mL | 2.0805 mL | 5.2013 mL | |
| 20 mM | 0.1560 mL | 0.7802 mL | 1.5604 mL | 3.9010 mL | |
| 25 mM | 0.1248 mL | 0.6242 mL | 1.2483 mL | 3.1208 mL | |
| 30 mM | 0.1040 mL | 0.5201 mL | 1.0403 mL | 2.6007 mL | |
| 40 mM | 0.0780 mL | 0.3901 mL | 0.7802 mL | 1.9505 mL | |
| 50 mM | 0.0624 mL | 0.3121 mL | 0.6242 mL | 1.5604 mL | |
| 60 mM | 0.0520 mL | 0.2601 mL | 0.5201 mL | 1.3003 mL | |
| 80 mM | 0.0390 mL | 0.1951 mL | 0.3901 mL | 0.9753 mL | |
| 100 mM | 0.0312 mL | 0.1560 mL | 0.3121 mL | 0.7802 mL |
Ethaboxam Related Classifications
HY-107492 Related Classifications
Powered by Bioz