フロモキセフナトリウム
Based on 1 Customer Validation
Flomoxef sodium is a oxacephem group antibiotic, with excellent activity against various Gram-positive bacteria.
商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。
- 純度 : 99.33%
- CAS 番号: 92823-03-5
- 分子式: C15H17F2N6NaO7S2
- 分子量:518.45
-
保管条件:
-20°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
Antibiotic アイソフォーム固有の製品をすべて表示
More
生物活性
製品説明
IC50 & Target
|
β-lactam |
化学情報
-
CAS 番号 92823-03-5
-
性状 Solid
-
分子量 518.45
-
分子式 C15H17F2N6NaO7S2
-
Color White to off-white
-
SMILES
O=C(C(N12)=C(CSC3=NN=NN3CCO)CO[C@]2([H])[C@](OC)(NC(CSC(F)F)=O)C1=O)O[Na]
-
別名
Flomoxef (sodium)
-
輸送条件
Room temperature in continental US; may vary elsewhere.
-
保管条件
-20°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
溶剤 & 溶解度
体外:
DMSO : ≥ 250 mg/mL (482.21 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 175 mg/mL (337.54 mM; Need ultrasonic)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
体内:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (4.01 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (4.01 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: PBS
Solubility: 100 mg/mL (192.88 mM); Clear solution; Need ultrasonic
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
純度とドキュメンテーション
-
データシート (275 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
取扱説明書 (2659 KB)
参考文献
[1]. Yazawa K, et al. In-vitro activity of flomoxef, a new oxacephem group antibiotic, against Nocardia in comparison with other cephalosporins. J Antimicrob Chemother. 1989 Dec;24(6):921-5. [Content Brief]
[2]. Simon C, et al. In vitro activity of flomoxef in comparison to other cephalosporins. Infection. 1988 Mar-Apr;16(2):131-4. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 1.9288 mL | 9.6441 mL | 19.2883 mL | 48.2207 mL |
| 5 mM | 0.3858 mL | 1.9288 mL | 3.8577 mL | 9.6441 mL | |
| 10 mM | 0.1929 mL | 0.9644 mL | 1.9288 mL | 4.8221 mL | |
| 15 mM | 0.1286 mL | 0.6429 mL | 1.2859 mL | 3.2147 mL | |
| 20 mM | 0.0964 mL | 0.4822 mL | 0.9644 mL | 2.4110 mL | |
| 25 mM | 0.0772 mL | 0.3858 mL | 0.7715 mL | 1.9288 mL | |
| 30 mM | 0.0643 mL | 0.3215 mL | 0.6429 mL | 1.6074 mL | |
| 40 mM | 0.0482 mL | 0.2411 mL | 0.4822 mL | 1.2055 mL | |
| 50 mM | 0.0386 mL | 0.1929 mL | 0.3858 mL | 0.9644 mL | |
| 60 mM | 0.0321 mL | 0.1607 mL | 0.3215 mL | 0.8037 mL | |
| 80 mM | 0.0241 mL | 0.1206 mL | 0.2411 mL | 0.6028 mL | |
| 100 mM | 0.0193 mL | 0.0964 mL | 0.1929 mL | 0.4822 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.