Ginsenoside Ra1
Based on 1 Customer Validation
Ginsenoside Ra1 is a dammarane-type bisdesmosidic saponin present in the roots of Panax ginseng. Ginsenoside Ra1 is hydrolyzed by gut-derived β-D-xylosidase to Ginsenoside Rb2 (HY-N0040). Ginsenoside Ra1 inhibits hypoxia/reoxygenation-induced activation of protein tyrosine kinase (PTK).
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity : 99.88%
- CAS No.: 83459-41-0
- 화학식: C58H98O26
- 분자량:1211.38
-
보관:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- 순도&문서
- References
-
Help & FAQs
Biological Activity
제품 설명
In Vitro
Ginsenoside Ra1 serves as a substrate for β-D-xylosidase derived from Bifidobacterium breve K-110 and is hydrolyzed to remove the terminal β-D-xylopyranosyl group, converting it to Ginsenoside Rb2 (HY-N0040)[1].
Ginsenoside Ra1 (10 μM; 2 h reoxygenation) inhibits hypoxia-reoxygenation-induced protein tyrosine kinase activation and reduces tyrosine-phosphorylated protein levels in HUVEC cells[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only. .
Chemical Information
-
CAS No. 83459-41-0
-
Appearance Solid
-
분자량 1211.38
-
화학식 C58H98O26
-
Color White to off-white
-
SMILES
C[C@]12[C@]3([C@@]([C@H](O)C[C@]1([H])[C@@]4([C@@](C(C)([C@@H](O[C@@]5([H])[C@@H]([C@H]([C@H](O)[C@@H](CO)O5)O)O[C@]6([H])O[C@@H]([C@@H](O)[C@H](O)[C@H]6O)CO)CC4)C)([H])CC2)C)([H])[C@]([C@@](CC/C=C(C)/C)(C)O[C@@H]7O[C@@H]([C@@H](O)[C@H](O)[C@H]7O)CO[C@H]8[C@@H]([C@H]([C@@H](O[C@@]9([H])[C@@H]([C@H]([C@H](O)CO9)O)O)CO8)O)O)([H])CC3)C
-
Structure Classification
-
Initial Source
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
용액&용해도
In Vitro:
DMSO : 100 mg/mL (82.55 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (2.06 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (2.06 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
순도&문서
-
Data Sheet (276 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 0.8255 mL | 4.1275 mL | 8.2550 mL | 20.6376 mL |
| 5 mM | 0.1651 mL | 0.8255 mL | 1.6510 mL | 4.1275 mL | |
| 10 mM | 0.0826 mL | 0.4128 mL | 0.8255 mL | 2.0638 mL | |
| 15 mM | 0.0550 mL | 0.2752 mL | 0.5503 mL | 1.3758 mL | |
| 20 mM | 0.0413 mL | 0.2064 mL | 0.4128 mL | 1.0319 mL | |
| 25 mM | 0.0330 mL | 0.1651 mL | 0.3302 mL | 0.8255 mL | |
| 30 mM | 0.0275 mL | 0.1376 mL | 0.2752 mL | 0.6879 mL | |
| 40 mM | 0.0206 mL | 0.1032 mL | 0.2064 mL | 0.5159 mL | |
| 50 mM | 0.0165 mL | 0.0826 mL | 0.1651 mL | 0.4128 mL | |
| 60 mM | 0.0138 mL | 0.0688 mL | 0.1376 mL | 0.3440 mL | |
| 80 mM | 0.0103 mL | 0.0516 mL | 0.1032 mL | 0.2580 mL |
Ginsenoside Ra1 Related Classifications
HY-N2506 Related Classifications
Powered by Bioz