Methyl 3-hydroxyoctanoate
Based on 1 Customer Validation
Methyl 3-hydroxyoctanoate (3-Hydroxy octanoic acid methyl ester) is an ester. Methyl 3-hydroxyoctanoate can be isolated from Pineapple.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity: 98.0%
- CAS No.: 7367-87-5
- 화학식: C9H18O3
- 분자량:174.24
-
보관:Pure form -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- 순도&문서
- References
-
Help & FAQs
Biological Activity
Methyl 3-hydroxyoctanoate is an ester volatile compound that can be isolated from pineapples[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 7367-87-5
-
Appearance Liquid (Density: 0.976±0.06 g/cm3)
-
분자량 174.24
-
화학식 C9H18O3
-
Color Colorless to light yellow
-
SMILES
O=C(OC)CC(CCCCC)O
-
Synonyms
3-Hydroxy octanoic acid methyl ester
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
Pure form -20°C 3 years In solvent -80°C 6 months -20°C 1 month
용액&용해도
Ethanol : ≥ 50 mg/mL (286.96 mM)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% EtOH 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 1.25 mg/mL (7.17 mM); Clear solution
This protocol yields a clear solution of ≥ 1.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL EtOH stock solution (12.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% EtOH 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 1.25 mg/mL (7.17 mM); Clear solution
This protocol yields a clear solution of ≥ 1.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL EtOH stock solution (12.5 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Add each solvent one by one: 10% EtOH 90% Corn Oil
Solubility: 1.25 mg/mL (7.17 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 1.25 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL EtOH stock solution (12.5 mg/mL) to 900 μL Corn oil, and mix evenly.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
순도&문서
-
Data Sheet (267 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| Ethanol | 1 mM | 5.7392 mL | 28.6961 mL | 57.3921 mL | 143.4803 mL |
| 5 mM | 1.1478 mL | 5.7392 mL | 11.4784 mL | 28.6961 mL | |
| 10 mM | 0.5739 mL | 2.8696 mL | 5.7392 mL | 14.3480 mL | |
| 15 mM | 0.3826 mL | 1.9131 mL | 3.8261 mL | 9.5654 mL | |
| 20 mM | 0.2870 mL | 1.4348 mL | 2.8696 mL | 7.1740 mL | |
| 25 mM | 0.2296 mL | 1.1478 mL | 2.2957 mL | 5.7392 mL | |
| 30 mM | 0.1913 mL | 0.9565 mL | 1.9131 mL | 4.7827 mL | |
| 40 mM | 0.1435 mL | 0.7174 mL | 1.4348 mL | 3.5870 mL | |
| 50 mM | 0.1148 mL | 0.5739 mL | 1.1478 mL | 2.8696 mL | |
| 60 mM | 0.0957 mL | 0.4783 mL | 0.9565 mL | 2.3913 mL | |
| 80 mM | 0.0717 mL | 0.3587 mL | 0.7174 mL | 1.7935 mL | |
| 100 mM | 0.0574 mL | 0.2870 mL | 0.5739 mL | 1.4348 mL |
Methyl 3-hydroxyoctanoate Related Classifications
HY-117201 Related Classifications
Powered by Bioz