Ruxuplam
Based on 1 Customer Validation
Ruxuplam (RNA splicing modulator-4) is an RNA splicing modulator. Ruxuplam controls the inclusion or exclusion of specific exons in precursor mRNA (pre-mRNA) by regulating alternative splicing events, thereby altering the coding sequence and function of mature mRNA. Ruxuplam shows promise for research into neurodegenerative diseases (such as Huntington's disease) and cancers.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity : 99.08%
- CAS No.: 3067915-73-2
- 화학식: C21H24FN5O2
- 분자량:397.45
-
보관:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- Protocol
- 순도&문서
- References
-
Help & FAQs
All DNA/RNA Synthesis Isoforms
More
Biological Activity
제품 설명
In Vitro
Ruxuplam (Compound A) binds to the 5' splice site sequence (AGAguaaggg, SEQ ID NO: 1) of HTT pre-mRNA, thereby promoting the inclusion of cryptic toxic exons and inducing transcript degradation via the nonsense-mediated decay pathway[1].
Ruxuplam regulates pre-mRNA splicing at splice site sequences, induces post-transcriptionally unstable gene transcripts, and suppresses gene transcript levels[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 3067915-73-2
-
Appearance Solid
-
분자량 397.45
-
화학식 C21H24FN5O2
-
Color Light yellow to yellow
-
SMILES
OC1=C(C2=CC=C(N=N2)N([C@@H]3[C@@H]([C@]4([H])N[C@](CCC4)([H])C3)F)C)C=C5C(N=C(O5)C)=C1
-
Synonyms
RNA splicing modulator-4
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
용액&용해도
In Vitro:
DMSO : 50 mg/mL (125.80 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.29 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
순도&문서
-
Data Sheet (272 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.5160 mL | 12.5802 mL | 25.1604 mL | 62.9010 mL |
| 5 mM | 0.5032 mL | 2.5160 mL | 5.0321 mL | 12.5802 mL | |
| 10 mM | 0.2516 mL | 1.2580 mL | 2.5160 mL | 6.2901 mL | |
| 15 mM | 0.1677 mL | 0.8387 mL | 1.6774 mL | 4.1934 mL | |
| 20 mM | 0.1258 mL | 0.6290 mL | 1.2580 mL | 3.1450 mL | |
| 25 mM | 0.1006 mL | 0.5032 mL | 1.0064 mL | 2.5160 mL | |
| 30 mM | 0.0839 mL | 0.4193 mL | 0.8387 mL | 2.0967 mL | |
| 40 mM | 0.0629 mL | 0.3145 mL | 0.6290 mL | 1.5725 mL | |
| 50 mM | 0.0503 mL | 0.2516 mL | 0.5032 mL | 1.2580 mL | |
| 60 mM | 0.0419 mL | 0.2097 mL | 0.4193 mL | 1.0483 mL | |
| 80 mM | 0.0315 mL | 0.1573 mL | 0.3145 mL | 0.7863 mL | |
| 100 mM | 0.0252 mL | 0.1258 mL | 0.2516 mL | 0.6290 mL |
Ruxuplam Related Classifications
HY-177360 Related Classifications
Powered by Bioz