Malic enzyme inhibitor ME1
Based on 5 publication(s) in Google Scholar
Malic enzyme inhibitor ME1 (ME1; compound 1) is a potent inhibitor of Malic enzyme (ME1) with an IC50 of 0.15 μM.
For research use only. We do not sell to patients.
- Purity: 99.69%
- CAS No.: 522649-59-8
- Formula: C20H21N3O3
- Molecular Weight:351.40
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Publications Citing Use of MedChemExpress (MCE) Malic enzyme inhibitor ME1
More-
Others
Biological Activity
IC50: 0.15 μM (Malic enzyme)[1]
Malic enzyme inhibitor ME1 (ME1; ME1*) (50 μM; 72 hours) shows a significant reduction in total cell numbers[2].
Malic enzyme inhibitor ME1 shows a significant reduction in cell viability/metabolic activity in MTS cell[2].
Malic enzyme inhibitor ME1 dose-dependently reduces the number of colonies formed by both HCT116 and HT29 cells[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:HCT116 and HT29 cell line
-
Concentration:50 μM
-
Incubation Time:72 hours
-
Result:Showed a significant reduction in total cell numbers.
Chemical Information
-
CAS No. 522649-59-8
-
Appearance Solid
-
Molecular Weight 351.40
-
Formula C20H21N3O3
-
Color White to off-white
-
SMILES
O=C(C(N1CCN(C2=CC=C(O)C=C2)CC1)C3)N(C4=CC=CC=C4)C3=O
-
Synonyms
ME1
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (5)
-
Journal Impact Factor
-
Most Recent
-
Circulation
2024 Apr 23;149(17):1354-1371. PMID: 38314588 -
Cell Rep
EGFR-phosphorylated GDH1 harmonizes with RSK2 to drive CREB activation and tumor metastasis in EGFR-activated lung cancer. [Abstract]2022 Dec 13;41(11):111827. PMID: 36516759 -
JCI Insight
Targeting pyruvate metabolism generates distinct CD8+ T cell responses to gammaherpesvirus and B lymphoma. [Abstract]2025 Aug 22;10(16):e187680. PMID: 40857407
Malic enzyme inhibitor ME1 purchased from MedChemExpress. Usage Cited in: JCI Insight. 2025 Aug 22;10(16):e187680. [Abstract]
Pdp1 transduced cells were incubated with ME1 (50 μM) or cPEPCK inhibitor for 1.5 hours, and then subjected to glycolysis rate assays together with culture medium control and EV transduced cells.
-
bioRxiv
Pyruvate Kinase Activity Regulates Cystine Starvation Induced Ferroptosis through Malic Enzyme 1 in Pancreatic Cancer Cells. [Abstract]2023 Sep 17:2023.09.15.557984. PMID: 37745559 -
Immunomedicine
Metabolic inhibitor screening identifies dihydrofolate reductase as an inducer of the tumor immune escape mediator CD24. [Abstract]2022 Dec;2(2):e1041. PMID: 36816458
Solvent & Solubility
DMSO : 100 mg/mL (284.58 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (5.92 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (5.92 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (274 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
[1]. Zhang YJ, et al. In silico design and synthesis of piperazine-1-pyrrolidine-2,5-dione scaffold-based novel malic enzyme inhibitors. Bioorg Med Chem Lett. 2006 Feb;16(3):525-8. Epub 2005 Nov 8. [Content Brief]
[2]. Fernandes L, et al. Malic Enzyme 1 (ME1) is pro-oncogenic in ApcMin/+ mice. Sci Rep. 2018 Sep 24;8(1):14268. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.8458 mL | 14.2288 mL | 28.4576 mL | 71.1440 mL |
| 5 mM | 0.5692 mL | 2.8458 mL | 5.6915 mL | 14.2288 mL | |
| 10 mM | 0.2846 mL | 1.4229 mL | 2.8458 mL | 7.1144 mL | |
| 15 mM | 0.1897 mL | 0.9486 mL | 1.8972 mL | 4.7429 mL | |
| 20 mM | 0.1423 mL | 0.7114 mL | 1.4229 mL | 3.5572 mL | |
| 25 mM | 0.1138 mL | 0.5692 mL | 1.1383 mL | 2.8458 mL | |
| 30 mM | 0.0949 mL | 0.4743 mL | 0.9486 mL | 2.3715 mL | |
| 40 mM | 0.0711 mL | 0.3557 mL | 0.7114 mL | 1.7786 mL | |
| 50 mM | 0.0569 mL | 0.2846 mL | 0.5692 mL | 1.4229 mL | |
| 60 mM | 0.0474 mL | 0.2371 mL | 0.4743 mL | 1.1857 mL | |
| 80 mM | 0.0356 mL | 0.1779 mL | 0.3557 mL | 0.8893 mL | |
| 100 mM | 0.0285 mL | 0.1423 mL | 0.2846 mL | 0.7114 mL |