Neticonazole hydrochloride
Based on 1 publication(s) in Google Scholar
Neticonazole hydrochloride is an imidazole derivative and a potent and long-acting antifungal agent. Neticonazole hydrochloride has anti-infection and anti-cancer effects.
For research use only. We do not sell to patients.
- Purity: 99.96%
- CAS No.: 130773-02-3
- Formula: C17H23ClN2OS
- Molecular Weight:338.90
-
Storage:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications Citing Use of MedChemExpress (MCE) Neticonazole hydrochloride
More
Biological Activity
Fungal [1]
Neticonazole (10 μM; 48 hours; C4-2B cells) treatment decreases the levels of both Alix and Rab27a, and significantly decreases nSMase2 levels. Neticonazole causes a significant inhibition in p-ERK levels[2].
Neticonazole (0-10 μM) exhibits a potent and dose-dependent inhibition of exosome release from C4-2B cells[2].
Neticonazole hydrochloride is also an orally active exosome biogenesis and secretion inhibitor[3].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:C4-2B cells
-
Concentration:10 µM
-
Incubation Time:48 hours
-
Result:Decreased the levels of both Alix and Rab27a, and significantly decreased nSMase2 levels.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Male C57BL/6 mice (8 weeks old) given ampicillin, neomycin, metronidazole and vancomycin, and injected with SW480 cells[3]
-
Dosage:1 ng/kg, 10 ng/kg and 100 ng/kg
-
Administration:Oral gavage; daily; for 15 days
-
Result:Significantly improved the survival of IDB mice with CRC xenograft tumors.
Chemical Information
-
CAS No. 130773-02-3
-
Appearance Solid
-
Molecular Weight 338.90
-
Formula C17H23ClN2OS
-
Color White to off-white
-
SMILES
CCCCCOC1=CC=CC=C1/C(N2C=CN=C2)=C\SC.[H]Cl
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications (1)
-
Journal Impact Factor
-
Most Recent
Solvent & Solubility
DMSO : 250 mg/mL (737.68 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : ≥ 100 mg/mL (295.07 mM)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 6.25 mg/mL (18.44 mM); Clear solution
This protocol yields a clear solution of ≥ 6.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (62.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 6.25 mg/mL (18.44 mM); Clear solution
This protocol yields a clear solution of ≥ 6.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (62.5 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: PBS
Solubility: 100 mg/mL (295.07 mM); Clear solution; Need ultrasonic
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Purity & Documentation
-
Data Sheet (275 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
[1]. Tsuboi R, et al. Hyperkeratotic chronic tinea pedis treated with neticonazole cream. Neticonazole Study Group. Int J Dermatol. 1996 May;35(5):371-3. [Content Brief]
[2]. Datta A, et al. High-throughput screening identified selective inhibitors of exosome biogenesis and secretion: A drug repurposing strategy for advanced cancer. Sci Rep. 2018 May 25;8(1):8161. [Content Brief]
[3]. Gu L, et al. The exosome secretion inhibitor neticonazole suppresses intestinal dysbacteriosis-induced tumorigenesis of colorectal cancer. Invest New Drugs. 2020 Apr;38(2):221-228. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 2.9507 mL | 14.7536 mL | 29.5072 mL | 73.7681 mL |
| 5 mM | 0.5901 mL | 2.9507 mL | 5.9014 mL | 14.7536 mL | |
| 10 mM | 0.2951 mL | 1.4754 mL | 2.9507 mL | 7.3768 mL | |
| 15 mM | 0.1967 mL | 0.9836 mL | 1.9671 mL | 4.9179 mL | |
| 20 mM | 0.1475 mL | 0.7377 mL | 1.4754 mL | 3.6884 mL | |
| 25 mM | 0.1180 mL | 0.5901 mL | 1.1803 mL | 2.9507 mL | |
| 30 mM | 0.0984 mL | 0.4918 mL | 0.9836 mL | 2.4589 mL | |
| 40 mM | 0.0738 mL | 0.3688 mL | 0.7377 mL | 1.8442 mL | |
| 50 mM | 0.0590 mL | 0.2951 mL | 0.5901 mL | 1.4754 mL | |
| 60 mM | 0.0492 mL | 0.2459 mL | 0.4918 mL | 1.2295 mL | |
| 80 mM | 0.0369 mL | 0.1844 mL | 0.3688 mL | 0.9221 mL | |
| 100 mM | 0.0295 mL | 0.1475 mL | 0.2951 mL | 0.7377 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.