(Rac)-PF-06250112
(Rac)-PF-0625011 is a racemate of PF-06250112. PF-06250112 is a potent, highly selective, orally bioavailable BTK inhibitor and shows inhibitory effect toward BMX nonreceptor tyrosine kinase and TEC.
For research use only. We do not sell to patients.
- CAS No.: 1609465-88-4
- Formula: C22H20F2N6O2
- Molecular Weight:438.43
-
Storage:
Please store the product under the recommended conditions in the Certificate of Analysis.
Biological Activity
Chemical Information
-
CAS No. 1609465-88-4
-
Molecular Weight 438.43
-
Formula C22H20F2N6O2
-
SMILES
O=C(C1=C(N)N(C2CN(C#N)CCC2)N=C1C3=CC=C(OC4=CC=C(F)C=C4F)C=C3)N
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Please store the product under the recommended conditions in the Certificate of Analysis.
Solvent & Solubility
DMSO : ≥ 250 mg/mL (570.22 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (4.74 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (4.74 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
References
Complete Stock Solution Preparation Table
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.2809 mL | 11.4043 mL | 22.8087 mL | 57.0216 mL |
| 5 mM | 0.4562 mL | 2.2809 mL | 4.5617 mL | 11.4043 mL | |
| 10 mM | 0.2281 mL | 1.1404 mL | 2.2809 mL | 5.7022 mL | |
| 15 mM | 0.1521 mL | 0.7603 mL | 1.5206 mL | 3.8014 mL | |
| 20 mM | 0.1140 mL | 0.5702 mL | 1.1404 mL | 2.8511 mL | |
| 25 mM | 0.0912 mL | 0.4562 mL | 0.9123 mL | 2.2809 mL | |
| 30 mM | 0.0760 mL | 0.3801 mL | 0.7603 mL | 1.9007 mL | |
| 40 mM | 0.0570 mL | 0.2851 mL | 0.5702 mL | 1.4255 mL | |
| 50 mM | 0.0456 mL | 0.2281 mL | 0.4562 mL | 1.1404 mL | |
| 60 mM | 0.0380 mL | 0.1901 mL | 0.3801 mL | 0.9504 mL | |
| 80 mM | 0.0285 mL | 0.1426 mL | 0.2851 mL | 0.7128 mL | |
| 100 mM | 0.0228 mL | 0.1140 mL | 0.2281 mL | 0.5702 mL |