11β-HSD1-IN-8
Based on 1 Customer Validation
11β-HSD1-IN-8 (compound c6a) is a 11β HSD1 inhibitor with an IC50 value of 2.3 μM for human 11β HSD1. 11β-HSD1-IN-8 can be used for the research of diabetes and cognitive decline.
For research use only. We do not sell to patients.
- Purity: 95.0%
- CAS No.: 386704-15-0
- Formula: C10H8F3NO3
- Molecular Weight:247.17
-
Storage:
4°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
Biological Activity
IC50: 2.3 μM (human 11β HSD)[1]
11β-HSD1-IN-8 (0-50 μM) inhibits human and rat 11β HSD1 with IC50 values of 2.3 μM and >50 μM, respectively[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 386704-15-0
-
Appearance Solid
-
Molecular Weight 247.17
-
Formula C10H8F3NO3
-
Color Off-white to light yellow
-
SMILES
COC(=O)CC(=O)C1=CN=C(C=C1)C(F)(F)F
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
Solvent & Solubility
DMSO : 100 mg/mL (404.58 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (10.11 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (271 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 4.0458 mL | 20.2288 mL | 40.4577 mL | 101.1441 mL |
| 5 mM | 0.8092 mL | 4.0458 mL | 8.0915 mL | 20.2288 mL | |
| 10 mM | 0.4046 mL | 2.0229 mL | 4.0458 mL | 10.1144 mL | |
| 15 mM | 0.2697 mL | 1.3486 mL | 2.6972 mL | 6.7429 mL | |
| 20 mM | 0.2023 mL | 1.0114 mL | 2.0229 mL | 5.0572 mL | |
| 25 mM | 0.1618 mL | 0.8092 mL | 1.6183 mL | 4.0458 mL | |
| 30 mM | 0.1349 mL | 0.6743 mL | 1.3486 mL | 3.3715 mL | |
| 40 mM | 0.1011 mL | 0.5057 mL | 1.0114 mL | 2.5286 mL | |
| 50 mM | 0.0809 mL | 0.4046 mL | 0.8092 mL | 2.0229 mL | |
| 60 mM | 0.0674 mL | 0.3371 mL | 0.6743 mL | 1.6857 mL | |
| 80 mM | 0.0506 mL | 0.2529 mL | 0.5057 mL | 1.2643 mL | |
| 100 mM | 0.0405 mL | 0.2023 mL | 0.4046 mL | 1.0114 mL |