3-Methylcatechol
Based on 1 Customer Validation
3-Methylcatechol is a phenolic derivative that can be produced by Pseudomonas putida MC2. 3-Methylcatechol can serve as a molecular building block in chemical synthesis to produce other active compounds.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 98.18%
- CAS No.: 488-17-5
- Formule: C7H8O2
- Masse moléculaire:124.14
-
Stockage:
4°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Activité biologique
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| MCF7 | GI50 |
27.34 μM
Compound: 3b
|
Cytotoxicity against human MCF7 cells assessed as cell growth inhibition after 48 hrs by SRB assay
Cytotoxicity against human MCF7 cells assessed as cell growth inhibition after 48 hrs by SRB assay
|
[PMID: 28041801] |
| TK-10 | GI50 |
38.14 μM
Compound: 3b
|
Cytotoxicity against human TK10 cells assessed as cell growth inhibition after 48 hrs by SRB assay
Cytotoxicity against human TK10 cells assessed as cell growth inhibition after 48 hrs by SRB assay
|
[PMID: 28041801] |
| UACC-62 | GI50 |
15.18 μM
Compound: 3b
|
Cytotoxicity against human UACC62 cells assessed as cell growth inhibition after 48 hrs by SRB assay
Cytotoxicity against human UACC62 cells assessed as cell growth inhibition after 48 hrs by SRB assay
|
[PMID: 28041801] |
3-Methylcatechol has certain ecological toxicity, with an LC50 of 11.83 mg/L and a ChV (chronic toxicity value) of 6.94 mg/L for fish, an EC50 of 3.61 mg/L and a ChV of 0.45 mg/L for green algae, and an LC50 of 109.54 mg/L and a ChV of 42.03 mg/L for daphnia[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 488-17-5
-
Appearance Solid
-
Masse moléculaire 124.14
-
Formule C7H8O2
-
Color White to yellow
-
SMILES
OC1=CC=CC(C)=C1O
-
Structure Classification
-
Initial Source
Rhodococcus sp. strain ZWL3NT
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
4°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
Solvant et solubilité
DMSO : 50 mg/mL (402.77 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (20.14 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (20.14 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (276 KB)
-
SDS (394 KB)
- English - EN (394 KB)
- Français - FR (394 KB)
- Deutsch - DE (394 KB)
- Norwegian - NO (394 KB)
- Español - ES (394 KB)
- Swedish - SV (394 KB)
- Italian - IT (394 KB)
- Korean - KR (394 KB)
- Portuguese - PT (394 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 8.0554 mL | 40.2771 mL | 80.5542 mL | 201.3855 mL |
| 5 mM | 1.6111 mL | 8.0554 mL | 16.1108 mL | 40.2771 mL | |
| 10 mM | 0.8055 mL | 4.0277 mL | 8.0554 mL | 20.1386 mL | |
| 15 mM | 0.5370 mL | 2.6851 mL | 5.3703 mL | 13.4257 mL | |
| 20 mM | 0.4028 mL | 2.0139 mL | 4.0277 mL | 10.0693 mL | |
| 25 mM | 0.3222 mL | 1.6111 mL | 3.2222 mL | 8.0554 mL | |
| 30 mM | 0.2685 mL | 1.3426 mL | 2.6851 mL | 6.7129 mL | |
| 40 mM | 0.2014 mL | 1.0069 mL | 2.0139 mL | 5.0346 mL | |
| 50 mM | 0.1611 mL | 0.8055 mL | 1.6111 mL | 4.0277 mL | |
| 60 mM | 0.1343 mL | 0.6713 mL | 1.3426 mL | 3.3564 mL | |
| 80 mM | 0.1007 mL | 0.5035 mL | 1.0069 mL | 2.5173 mL | |
| 100 mM | 0.0806 mL | 0.4028 mL | 0.8055 mL | 2.0139 mL |
3-Methylcatechol Related Classifications
HY-W012815 Related Classifications
Powered by Bioz