4-Allyltoluene
Based on 1 Customer Validation
4-Allyltoluene, an aromatic compound, can elicite antennal olfactory response of Mediterranean fruit fly measured by electroantennography (EAG).
For research use only. We do not sell to patients.
- Purity: 97.0%
- CAS No.: 3333-13-9
- Formula: C10H12
- Molecular Weight:132.20
-
Storage:
4°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
Biological Activity
Chemical Information
-
CAS No. 3333-13-9
-
Appearance Liquid (Density: 0.865 g/cm3)
-
Molecular Weight 132.20
-
Formula C10H12
-
Color Colorless to light yellow
-
SMILES
C=CCC1=CC=C(C)C=C1
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
Solvent & Solubility
DMSO : 100 mg/mL (756.43 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (18.91 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (18.91 mM); Suspended solution
This protocol yields a suspended solution of ≥ 2.5 mg/mL (saturation unknown). Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (269 KB)
-
SDS (570 KB)
- English - EN (570 KB)
- Français - FR (570 KB)
- Deutsch - DE (570 KB)
- Norwegian - NO (570 KB)
- Español - ES (570 KB)
- Swedish - SV (570 KB)
- Italian - IT (570 KB)
- Korean - KR (570 KB)
- Portuguese - PT (570 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 7.5643 mL | 37.8215 mL | 75.6430 mL | 189.1074 mL |
| 5 mM | 1.5129 mL | 7.5643 mL | 15.1286 mL | 37.8215 mL | |
| 10 mM | 0.7564 mL | 3.7821 mL | 7.5643 mL | 18.9107 mL | |
| 15 mM | 0.5043 mL | 2.5214 mL | 5.0429 mL | 12.6072 mL | |
| 20 mM | 0.3782 mL | 1.8911 mL | 3.7821 mL | 9.4554 mL | |
| 25 mM | 0.3026 mL | 1.5129 mL | 3.0257 mL | 7.5643 mL | |
| 30 mM | 0.2521 mL | 1.2607 mL | 2.5214 mL | 6.3036 mL | |
| 40 mM | 0.1891 mL | 0.9455 mL | 1.8911 mL | 4.7277 mL | |
| 50 mM | 0.1513 mL | 0.7564 mL | 1.5129 mL | 3.7821 mL | |
| 60 mM | 0.1261 mL | 0.6304 mL | 1.2607 mL | 3.1518 mL | |
| 80 mM | 0.0946 mL | 0.4728 mL | 0.9455 mL | 2.3638 mL | |
| 100 mM | 0.0756 mL | 0.3782 mL | 0.7564 mL | 1.8911 mL |
4-Allyltoluene Related Classifications
HY-W074514 Related Classifications
Powered by Bioz