5-Methylresorcinol monohydrate
Based on 1 Customer Validation
5-Methylresorcinol monohydrate (Orcinol monohydrate) is a tyrosinase inhibitor. 5-Methylresorcinol monohydrate shows cytotoxicity. 5-Methylresorcinol monohydrate also is an oral active and cross the blood-brain barrier anxiolytic agent.
For research use only. We do not sell to patients.
- Purity: 99.81%
- CAS No.: 6153-39-5
- Formula: C7H10O3
- Molecular Weight:142.15
-
Storage:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Biological Activity
5-Methylresorcinol monohydrate (Orcinol monohydrate) (100, 200, 500 µM; 24, 72 h) shows cytotoxicity for B16, Hs68 cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:B16, Hs68 cells
-
Concentration:100, 200, 500 µM
-
Incubation Time:24, 72 h
-
Result:Showed cytotoxicity with the inhibition rate of 101.7% for Hs68 cells at 24 h and 104.4% inhibition rate for B16 cells at 72 h.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:18-22 g Male CD-1 mice[2]
-
Dosage:2.5, 5 mg/kg
-
Administration:P.o.
-
Result:Increased the time spent in open arms and the number of entries into open arms in the elevated plus-maze test, increased the number of head-dips in the hole-board test; did not significantly affect the locomotion of mice in the open-field test.
Chemical Information
-
CAS No. 6153-39-5
-
Appearance Solid
-
Molecular Weight 142.15
-
Formula C7H10O3
-
Color Off-white to light yellow
-
SMILES
OC1=CC(C)=CC(O)=C1.[H]O[H]
-
Synonyms
Orcinol monohydrate
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Solvent & Solubility
H2O : 100 mg/mL (703.48 mM; Need ultrasonic)
DMSO : 100 mg/mL (703.48 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (17.59 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Purity & Documentation
-
Data Sheet (273 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 7.0348 mL | 35.1741 mL | 70.3482 mL | 175.8706 mL |
| 5 mM | 1.4070 mL | 7.0348 mL | 14.0696 mL | 35.1741 mL | |
| 10 mM | 0.7035 mL | 3.5174 mL | 7.0348 mL | 17.5871 mL | |
| 15 mM | 0.4690 mL | 2.3449 mL | 4.6899 mL | 11.7247 mL | |
| 20 mM | 0.3517 mL | 1.7587 mL | 3.5174 mL | 8.7935 mL | |
| 25 mM | 0.2814 mL | 1.4070 mL | 2.8139 mL | 7.0348 mL | |
| 30 mM | 0.2345 mL | 1.1725 mL | 2.3449 mL | 5.8624 mL | |
| 40 mM | 0.1759 mL | 0.8794 mL | 1.7587 mL | 4.3968 mL | |
| 50 mM | 0.1407 mL | 0.7035 mL | 1.4070 mL | 3.5174 mL | |
| 60 mM | 0.1172 mL | 0.5862 mL | 1.1725 mL | 2.9312 mL | |
| 80 mM | 0.0879 mL | 0.4397 mL | 0.8794 mL | 2.1984 mL | |
| 100 mM | 0.0703 mL | 0.3517 mL | 0.7035 mL | 1.7587 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.