Ibuprofen piconol
Based on 1 publication(s) in Google Scholar
Ibuprofen piconol is a non-steroidal, anti-inflammatory (NSAID) agent for the topical relief of primary thermal burns and sunburns.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza : 99.38%
- No. CAS: 64622-45-3
- Fòrmula: C19H23NO2
- Peso molecular:297.39
-
Almacenamiento:Pure form -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Protocolo
- Pureza y Documentación
- Referencias
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) Ibuprofen piconol
More
Actividad biológica
Descripciòn
In Vitro
Ibuprofen piconol is a chemically stable, slightly hygroscopic liquid that strongly partitions into the oil phase and shows no indication of surface activity. This drug has very limited solubility in water (16.5 ppm), modest solubility in glycerol (16.4 mg/mL), and is miscible with less polar organics except for silicone fluids[1]. Varying the initial concentration of ibuprofen piconol does not alter the hydrolysis half-life (concentration range from 50 to 200 μg/mL). The anticoagulant used alters the hydrolysis half-life. For plasma, the half-life is shortest when no anticoagulant is present (t1/2=2.5 h) and longer with the presence of anticoagulants; t1/2=8.0 h for citrate, t1/2=15.5 h for heparin and t1/2=161.8 h for EDTA. Red blood cell uptake of ibuprofen piconol is minimal and ranges from 0.4 to 4.1% over the ibuprofen piconol concentrations used in the study[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only. Further protocols information, click here.
In Vivo
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
No. CAS 64622-45-3
-
Appearance Liquid (Density: 1.0971 g/cm3)
-
Peso molecular 297.39
-
Fòrmula C19H23NO2
-
Color Colorless to light yellow
-
SMILES
O=C(OCC1=NC=CC=C1)C(C)C2=CC=C(CC(C)C)C=C2
-
Synonyms
U75630
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Pure form -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Cell Biol Toxicol
CBX6 induces CD8+ T cell exhaustion and tumor development in esophageal squamous cell carcinoma through SMARCD1-mediated CCL8 secretion and lactate efflux. [Abstract]2025 Nov 12;41(1):150. PMID: 41219497
Solvente y solubilidad
In Vitro:
DMSO : ≥ 50 mg/mL (168.13 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (8.41 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (8.41 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocolo
-
Research Protocol for Inflammation-related Diseases
The NLRP3 inflammasome is a cytosolic innate immune signaling platform that integrates priming signals and danger-signal activation to promote caspase-1 activation, maturation of IL-1β and IL-18, and gasdermin D-mediated pyroptotic cell death. The core experimental logic is to determine whether inflammatory disease phenotypes are driven by increased NLRP3 expression, ASC-containing inflammasome assembly, caspase-1 cleavage, GSDMD cleavage, and extracellular release of IL-1β/IL-18 rather than by nonspecific cell injury alone. The pathway is strongly linked to inflammation-related disease phenotypes because monosodium urate crystals activate NALP3/NLRP3 inflammasome signaling in gout-like crystal inflammation, cholesterol crystals activate NLRP3 inflammasomes in atherogenesis models, and DSS-induced intestinal inflammation has been reported to involve NLRP3 inflammasome activity. However, experimental colitis studies also show context-dependent protective effects of NLRP3 inflammasome co
Pureza y Documentación
-
Ficha de datos (271 KB)
-
SDS (396 KB)
- English - EN (396 KB)
- Français - FR (396 KB)
- Deutsch - DE (396 KB)
- Norwegian - NO (396 KB)
- Español - ES (396 KB)
- Swedish - SV (396 KB)
- Italian - IT (396 KB)
- Korean - KR (396 KB)
- Portuguese - PT (396 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.3626 mL | 16.8129 mL | 33.6259 mL | 84.0647 mL |
| 5 mM | 0.6725 mL | 3.3626 mL | 6.7252 mL | 16.8129 mL | |
| 10 mM | 0.3363 mL | 1.6813 mL | 3.3626 mL | 8.4065 mL | |
| 15 mM | 0.2242 mL | 1.1209 mL | 2.2417 mL | 5.6043 mL | |
| 20 mM | 0.1681 mL | 0.8406 mL | 1.6813 mL | 4.2032 mL | |
| 25 mM | 0.1345 mL | 0.6725 mL | 1.3450 mL | 3.3626 mL | |
| 30 mM | 0.1121 mL | 0.5604 mL | 1.1209 mL | 2.8022 mL | |
| 40 mM | 0.0841 mL | 0.4203 mL | 0.8406 mL | 2.1016 mL | |
| 50 mM | 0.0673 mL | 0.3363 mL | 0.6725 mL | 1.6813 mL | |
| 60 mM | 0.0560 mL | 0.2802 mL | 0.5604 mL | 1.4011 mL | |
| 80 mM | 0.0420 mL | 0.2102 mL | 0.4203 mL | 1.0508 mL | |
| 100 mM | 0.0336 mL | 0.1681 mL | 0.3363 mL | 0.8406 mL |
Ibuprofen piconol Related Classifications
HY-101482 Related Classifications
Powered by Bioz