RSV-IN-1
Based on 1 Customer Validation
RSV-IN-1 is a human respiratory syncytical virus (hRSV) inhibitor, with an IC50 of 0.11 μM.
商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。
- 純度: 99.95%
- CAS 番号: 861139-16-4
- 分子式: C20H21N5O4S
- 分子量:427.48
-
保管条件:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
生物活性
IC50: 0.11μM (hRSV)[1].
The concentration of P13 that reduces the number of RSV plaques in HEp-2 cells by 50% (IC50) is 0.11 μM. The concentration of P13 that reduces the viability of HEp-2 by 50% (CC50) is 310 μM. Note that some cytotoxicity of P13 observed at 500 μM might be due to DMSO solvent. Hence, the selective index (CC50/IC50) values is 2818 for P13. Note that even at the relatively high concentrations P13 does not completely block the development of RSV plaques. These escape plaques are of smaller size and of non-syncytial phenotype as compared to plaques formed in the absence of inhibitor[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
化学情報
-
CAS 番号 861139-16-4
-
性状 Solid
-
分子量 427.48
-
分子式 C20H21N5O4S
-
Color Light yellow to green yellow
-
SMILES
O=S(C1=CC=C(OC)C(C2=NN=C3N2N=C(C)C4=C3C=CC=C4)=C1)(N(CCO)C)=O
-
輸送条件
Room temperature in continental US; may vary elsewhere.
-
保管条件
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
溶剤 & 溶解度
DMSO : 100 mg/mL (233.93 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (5.85 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (4.87 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
純度とドキュメンテーション
-
データシート (275 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
取扱説明書 (2659 KB)
参考文献
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.3393 mL | 11.6965 mL | 23.3929 mL | 58.4823 mL |
| 5 mM | 0.4679 mL | 2.3393 mL | 4.6786 mL | 11.6965 mL | |
| 10 mM | 0.2339 mL | 1.1696 mL | 2.3393 mL | 5.8482 mL | |
| 15 mM | 0.1560 mL | 0.7798 mL | 1.5595 mL | 3.8988 mL | |
| 20 mM | 0.1170 mL | 0.5848 mL | 1.1696 mL | 2.9241 mL | |
| 25 mM | 0.0936 mL | 0.4679 mL | 0.9357 mL | 2.3393 mL | |
| 30 mM | 0.0780 mL | 0.3899 mL | 0.7798 mL | 1.9494 mL | |
| 40 mM | 0.0585 mL | 0.2924 mL | 0.5848 mL | 1.4621 mL | |
| 50 mM | 0.0468 mL | 0.2339 mL | 0.4679 mL | 1.1696 mL | |
| 60 mM | 0.0390 mL | 0.1949 mL | 0.3899 mL | 0.9747 mL | |
| 80 mM | 0.0292 mL | 0.1462 mL | 0.2924 mL | 0.7310 mL | |
| 100 mM | 0.0234 mL | 0.1170 mL | 0.2339 mL | 0.5848 mL |