PEG8000
Based on 2 publication(s) in Google Scholar
PEG8000 can be used for phage precipitation, isolation of plasmid DNA, and promotion of flat end-junction reactions.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.90%
- CAS. Nr.: 25322-68-3
- Formel: (C2H4O)nH2O
- Molecular Weight:8000.00
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) PEG8000
More
Customer Validation & Images
-
Bio/Physico-chemical Assay
Biologische Aktivität
The FDA has approved polyethylene glycol (PEG) for use as a vehicle or base in foods, cosmetics and pharmaceuticals, including injectable, topical, rectal and nasal formulations. PEG shows little toxicity, and is eliminated from the body intact by either the kidneys (for PEGs < 30 kDa) or in the faeces (for PEGs > 20 kDa). PEG lacks immunogenicity, and antibodies to PEG are generated in rabbits only if PEG is combined with highly immunogenic proteins[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS. Nr. 25322-68-3
-
Appearance Solid
-
Molecular Weight 8000.00
-
Formel (C2H4O)nH2O
-
Color White to off-white
-
SMILES
[H]OCCO[H].[n]
-
Synonyms
Polyethylene glycol 8000
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (2)
-
Journal Impact Factor
-
Most Recent
-
Cell Commun Signal
Grass carp reovirus VP35 hijacks DHX15 into phase-separated inclusion bodies to evade host antiviral immunity. [Abstract]2026 Feb 9;24(1):168. PMID: 41664180 -
Int J Biol Macromol
Liquid-liquid phase separation of RBM33 facilitates hippocampus aging by inducing microglial senescence by activating CDKN1A. [Abstract]2025 Apr 9:142986. PMID: 40216137
PEG8000 purchased from MedChemExpress. Usage Cited in: Int J Biol Macromol. 2025 Apr 9:142986. [Abstract]
Differential interference contrast (DIC) and fluorescent images of 50 μM mCherry-hRBM33 and its truncation mutants under 100 mM NaCl (pH 7.5) and 10 % polyethylene glycol (PEG) 8000, scale bar, 5 μm, the red arrow indicating the RBM33 condensates.
Lösungsmittel & Löslichkeit
H2O : 100 mg/mL (12.50 mM; Need ultrasonic)
DMSO : 100 mg/mL (12.50 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5 mg/mL (0.63 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 5 mg/mL (0.63 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Reinheit & Dokumentation
-
Data Sheet (270 KB)
-
SDS (396 KB)
- English - EN (396 KB)
- Français - FR (396 KB)
- Deutsch - DE (396 KB)
- Norwegian - NO (396 KB)
- Español - ES (396 KB)
- Swedish - SV (396 KB)
- Italian - IT (396 KB)
- Korean - KR (396 KB)
- Portuguese - PT (396 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 0.1250 mL | 0.6250 mL | 1.2500 mL | 3.1250 mL |
| 5 mM | 0.0250 mL | 0.1250 mL | 0.2500 mL | 0.6250 mL | |
| 10 mM | 0.0125 mL | 0.0625 mL | 0.1250 mL | 0.3125 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
PEG8000 Related Classifications
HY-Y0873J Related Classifications
Powered by Bioz