YTX-465
Based on 1 Customer Validation
YTX-465 is a stearoyl-CoA desaturase (Ole1/SCD) inhibitor. YTX-465 inhibits Ole1 and SCD1 with IC50s of 0.039 μM and 30.4 μM, respectively. YTX-465 can be used in the research of Parkinson’s disease and other synucleinopathies.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.06%
- CAS. Nr.: 2225824-53-1
- Formel: C25H26N6O3
- Molecular Weight:458.51
-
Speicherung:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Biologische Aktivität
|
Ole1 0.039 μM (IC50) |
SCD1 30.4 μM (IC50) |
YTX-465 (1-10000 nM) has an EC50 value of 0.013 μM for α-synuclein (α-syn) toxicity rescue[1].
YTX-465 (0.05 μM; 0-2 days) rescue the growth of α-Syn-expressing yeast[1].
YTX-465 (0, 10, 40, 160, 640, 2500 nM; 4h) increases the level of Ole1 protein in wild-type yeast expressing OLE1 in a concentration-dependent manner, that indicate YTX-465 induce a negative feedback loop[1].
YTX-465 (0, 0.03, 0.09, 0.27, 0.81 μM; 6 hours) reduces fatty desaturation in a concentration-dependent manner in wild-type yeast, with a 50% reduction in desaturation at 0.03 μM[1].
YTX-465 (0.25 μM; 8 hours) decreases the desaturation index (DI) for all major classes of membrane phospholipids in wild-type yeast[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS. Nr. 2225824-53-1
-
Appearance Solid
-
Molecular Weight 458.51
-
Formel C25H26N6O3
-
Color White to off-white
-
SMILES
O=C(NCC(N1CCC(C2=NC(C3=CC4=C(C=C3)C(C)=NN4C)=NO2)CC1)=O)C5=CC=CC=C5
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Lösungsmittel & Löslichkeit
DMSO : 100 mg/mL (218.10 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.45 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (5.45 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (272 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.1810 mL | 10.9049 mL | 21.8098 mL | 54.5244 mL |
| 5 mM | 0.4362 mL | 2.1810 mL | 4.3620 mL | 10.9049 mL | |
| 10 mM | 0.2181 mL | 1.0905 mL | 2.1810 mL | 5.4524 mL | |
| 15 mM | 0.1454 mL | 0.7270 mL | 1.4540 mL | 3.6350 mL | |
| 20 mM | 0.1090 mL | 0.5452 mL | 1.0905 mL | 2.7262 mL | |
| 25 mM | 0.0872 mL | 0.4362 mL | 0.8724 mL | 2.1810 mL | |
| 30 mM | 0.0727 mL | 0.3635 mL | 0.7270 mL | 1.8175 mL | |
| 40 mM | 0.0545 mL | 0.2726 mL | 0.5452 mL | 1.3631 mL | |
| 50 mM | 0.0436 mL | 0.2181 mL | 0.4362 mL | 1.0905 mL | |
| 60 mM | 0.0363 mL | 0.1817 mL | 0.3635 mL | 0.9087 mL | |
| 80 mM | 0.0273 mL | 0.1363 mL | 0.2726 mL | 0.6816 mL | |
| 100 mM | 0.0218 mL | 0.1090 mL | 0.2181 mL | 0.5452 mL |
YTX-465 Related Classifications
HY-124751 Related Classifications
Powered by Bioz