AMPC
Based on 1 Customer Validation
AMPC is a potent and effective TFF3 inhibitor. AMPC inhibits cell proliferation, survival, oncogenicity, and CSC-like behaviour in TFF3-positive CMS4 CRC cells. AMPC acts as a potential anti-cancer agent alone or in combination with 5-FU, and can be used for cancer research.
For research use only. We do not sell to patients.
- Purity: 99.11%
- CAS No.: 2254434-33-6
- Formula: C25H16FN3O3
- Molecular Weight:425.41
-
Storage:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
-
Apoptosis Compound Library
HY-L003
-
Anti-Cancer Compound Library
HY-L025
-
Clinical Compound Library
HY-L026
-
Targeted Diversity Library
HY-L099
-
Heterocyclic Compound Library
HY-L138
-
Cell Death Library
HY-L162
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Clinical Compound Library Plus
HY-L026P
-
Bioactive Compound Library
HY-L001
-
Non-Alcoholic Fatty Liver Disease (NAFLD) Compound Library
HY-L199
-
High-Throughput Bioactive Compound Library
HY-L205
Biological Activity
AMPC decreases cell proliferation in CMS4 CRC cells, the IC50 values are 2.63 μM, 4.65 μM, and 69.69 μM, respectively in SW620 (high TFF3 expression), Caco-2, SW480 cells (low TFF3 expression), respectively[1]. AMPC (1-10 μM) significantly reduces the total cellular levels of TFF3 in SW620 and Caco2 cells in a dose dependent manner[1].AMPC induces apoptosis in a dose dependent manner by the inhibition of TFF3, it induces a decrease in the S-phase population and increases caspase3/7 activity compared with control cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:SW620 cells are subcutaneously injected into nude mice[1]
-
Dosage:40 mg/kg
-
Administration:Intraperitoneal injection; 40 mg/kg; once daily
-
Result:Lead to tumor decreasein vivo. Results in a marked reduction of Ki67 expression in tumor.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS No. 2254434-33-6
-
Appearance Solid
-
Molecular Weight 425.41
-
Formula C25H16FN3O3
-
Color Off-white to light yellow
-
SMILES
N#CC(C1C2=CC=C(C3=CC(C)=C(F)N=C3)C=C2)=C(N)OC(C4=CC=CC=C4O5)=C1C5=O
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Solvent & Solubility
DMSO : 115 mg/mL (270.33 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 6 mg/mL (14.10 mM); Clear solution
This protocol yields a clear solution of ≥ 6 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (60.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (275 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.3507 mL | 11.7534 mL | 23.5067 mL | 58.7668 mL |
| 5 mM | 0.4701 mL | 2.3507 mL | 4.7013 mL | 11.7534 mL | |
| 10 mM | 0.2351 mL | 1.1753 mL | 2.3507 mL | 5.8767 mL | |
| 15 mM | 0.1567 mL | 0.7836 mL | 1.5671 mL | 3.9178 mL | |
| 20 mM | 0.1175 mL | 0.5877 mL | 1.1753 mL | 2.9383 mL | |
| 25 mM | 0.0940 mL | 0.4701 mL | 0.9403 mL | 2.3507 mL | |
| 30 mM | 0.0784 mL | 0.3918 mL | 0.7836 mL | 1.9589 mL | |
| 40 mM | 0.0588 mL | 0.2938 mL | 0.5877 mL | 1.4692 mL | |
| 50 mM | 0.0470 mL | 0.2351 mL | 0.4701 mL | 1.1753 mL | |
| 60 mM | 0.0392 mL | 0.1959 mL | 0.3918 mL | 0.9794 mL | |
| 80 mM | 0.0294 mL | 0.1469 mL | 0.2938 mL | 0.7346 mL | |
| 100 mM | 0.0235 mL | 0.1175 mL | 0.2351 mL | 0.5877 mL |
AMPC Related Classifications
HY-139065 Related Classifications
Powered by Bioz