AZD 4017
Based on 1 Customer Validation
AZD 4017 is a potent, selective 11β-Hydroxysteroid Dehydrogenase Type 1 (11β-HSD1) inhibitor, with an IC50 of 7 nM.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.20%
- CAS No.: 1024033-43-9
- Formule: C22H33N3O3S
- Masse moléculaire:419.58
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Activité biologique
IC50: 7 nM (11β-HSD1)[1].
AZD 4017 displays excellent selectivity versus the related enzymes 11-βHSD2, 17β-HSD1, 17β-HSD3 (all IC50>30 μM) and shows no measurable activity against the glucocorticoid and mineralocorticoid receptors. Despite having high potency for the human form of 11β-HSD1, AZD 4017 shows much reduced activity across species with the exception of cynomolgous monkey (IC50=0.029 μM). Additionally, as it is believed that adipose is a key target organ, inhibition of 11β-HSD1 activity is measured in isolated human adipocytes from nondiabetic volunteers. AZD 4017 is shown to be a potent inhibitor in this key target tissue (IC50=0.002 μM) in good agreement with the enzyme potency, thus providing some confidence that AZD 4017 is not restricted from adipose tissue by the fact that it was acidic[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS No. 1024033-43-9
-
Appearance Solid
-
Masse moléculaire 419.58
-
Formule C22H33N3O3S
-
Color Light yellow to yellow
-
SMILES
O=C(O)C[C@H]1CN(C2=NC(SCCC)=C(C(NC3CCCCC3)=O)C=C2)CCC1
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Solvant et solubilité
DMSO : 125 mg/mL (297.92 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (4.96 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (272 KB)
-
SDS (392 KB)
- English - EN (392 KB)
- Français - FR (392 KB)
- Deutsch - DE (392 KB)
- Norwegian - NO (392 KB)
- Español - ES (392 KB)
- Swedish - SV (392 KB)
- Italian - IT (392 KB)
- Korean - KR (392 KB)
- Portuguese - PT (392 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. Scott JS, et al. Discovery of a potent, selective, and orally bioavailable acidic 11β-hydroxysteroid dehydrogenase type 1 (11β-HSD1) inhibitor: discovery of 2-[(3S)-1-[5-(cyclohexylcarbamoyl)-6-propylsulfanylpyridin-2-yl]-3-piperidyl]acetic acid (AZD4017). J Med Chem. 2012 Jun 28;55(12):5951-64. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.3833 mL | 11.9167 mL | 23.8334 mL | 59.5834 mL |
| 5 mM | 0.4767 mL | 2.3833 mL | 4.7667 mL | 11.9167 mL | |
| 10 mM | 0.2383 mL | 1.1917 mL | 2.3833 mL | 5.9583 mL | |
| 15 mM | 0.1589 mL | 0.7944 mL | 1.5889 mL | 3.9722 mL | |
| 20 mM | 0.1192 mL | 0.5958 mL | 1.1917 mL | 2.9792 mL | |
| 25 mM | 0.0953 mL | 0.4767 mL | 0.9533 mL | 2.3833 mL | |
| 30 mM | 0.0794 mL | 0.3972 mL | 0.7944 mL | 1.9861 mL | |
| 40 mM | 0.0596 mL | 0.2979 mL | 0.5958 mL | 1.4896 mL | |
| 50 mM | 0.0477 mL | 0.2383 mL | 0.4767 mL | 1.1917 mL | |
| 60 mM | 0.0397 mL | 0.1986 mL | 0.3972 mL | 0.9931 mL | |
| 80 mM | 0.0298 mL | 0.1490 mL | 0.2979 mL | 0.7448 mL | |
| 100 mM | 0.0238 mL | 0.1192 mL | 0.2383 mL | 0.5958 mL |
AZD 4017 Related Classifications
HY-18053 Related Classifications
Powered by Bioz