Mal-amido-PEG2-C2-amido-Ph-C2-CO-AZD
Based on 2 publication(s) in Google Scholar
Mal-amido-PEG2-C2-amido-Ph-C2-CO-AZD (Mal-PEG2-AZD) is a PEG-based PROTAC linker that can be used in the synthesis of PROTACs.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.77%
- CAS No.: 1037589-69-7
- Formule: C26H32N4O8
- Masse moléculaire:528.55
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) Mal-amido-PEG2-C2-amido-Ph-C2-CO-AZD
MoreVoir tous les produits spécifiques à Isoform PROTAC Linkers
More
Activité biologique
|
PEGs |
PROTACs contain two different ligands connected by a linker; one is a ligand for an E3 ubiquitin ligase and the other is for the target protein. PROTACs exploit the intracellular ubiquitin-proteasome system to selectively degrade target proteins[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Eight week old Zucker rats[3]
-
Dosage:3 mg/kg and 10 mg/kg
-
Administration:Subcutaneously twice a week for two weeks
-
Result:There was no change of BW observed, and food intake was not changed in the treated groups compared to control. Caused a significant decrease of glucose excursion during the oral glucose tolerance test (OGTT) compared to control.
-
Animal Model:7-to-8-month-old Akita mice with type 1 diabete model[4]
-
Dosage:10 mg/kg
-
Administration:Intraperitoneally injected; twice a week; for four weeks
-
Result:Administration improved retinal function in diabetic Akita mice.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS No. 1037589-69-7
-
Appearance Solid
-
Masse moléculaire 528.55
-
Formule C26H32N4O8
-
Color White to off-white
-
SMILES
O=C(CCN1C(C=CC1=O)=O)NCCOCCOCCC(NC2=CC=C(C=C2)CCC(N3C(CC3)=O)=O)=O
-
Synonyms
Mal-PEG2-AZD
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (2)
-
Journal Impact Factor
-
Most Recent
-
Neuropsychopharmacology
Namesake of PF-05231023: how nomenclature confusion leads to experimental misinterpretation in pharmacologic research. [Abstract]2025 Sep 19. PMID: 40973770 -
Mol Metab
Epigenetic regulation of GABA catabolism in iPSC-derived neurons: the molecular links between FGF21 and histone methylation. [Abstract]2023 Nov:77:101798. PMID: 37689244
Solvant et solubilité
DMSO : 100 mg/mL (189.20 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (4.73 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (4.73 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (269 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.8920 mL | 9.4598 mL | 18.9197 mL | 47.2992 mL |
| 5 mM | 0.3784 mL | 1.8920 mL | 3.7839 mL | 9.4598 mL | |
| 10 mM | 0.1892 mL | 0.9460 mL | 1.8920 mL | 4.7299 mL | |
| 15 mM | 0.1261 mL | 0.6307 mL | 1.2613 mL | 3.1533 mL | |
| 20 mM | 0.0946 mL | 0.4730 mL | 0.9460 mL | 2.3650 mL | |
| 25 mM | 0.0757 mL | 0.3784 mL | 0.7568 mL | 1.8920 mL | |
| 30 mM | 0.0631 mL | 0.3153 mL | 0.6307 mL | 1.5766 mL | |
| 40 mM | 0.0473 mL | 0.2365 mL | 0.4730 mL | 1.1825 mL | |
| 50 mM | 0.0378 mL | 0.1892 mL | 0.3784 mL | 0.9460 mL | |
| 60 mM | 0.0315 mL | 0.1577 mL | 0.3153 mL | 0.7883 mL | |
| 80 mM | 0.0236 mL | 0.1182 mL | 0.2365 mL | 0.5912 mL | |
| 100 mM | 0.0189 mL | 0.0946 mL | 0.1892 mL | 0.4730 mL |
Mal-amido-PEG2-C2-amido-Ph-C2-CO-AZD Related Classifications
HY-113697 Related Classifications
Powered by Bioz