N6-Ethyladenosine
Based on 1 Customer Validation
N6-Ethyladenosine is an adenosine derivative, acts as a Adenosine receptor agonist, with Kis of 4.9 and 4.7 nM for hA1AR and hA3AR, respectively.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté : 99.90%
- CAS No.: 14357-08-5
- Formule: C12H17N5O4
- Masse moléculaire:295.29
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
HY-13201A
CGS 21680 HydrochlorideAdenosine A2A Receptor Agonist -
HY-14917
CapadenosonAdenosine Receptor Agonist -
HY-B1742
ProxyphyllineAdenosine Receptor Antagonist -
HY-10995
TozadenantAdenosine Receptor Antagonist -
HY-18939
N6-CyclohexyladenosineAdenosine Receptor Agonist -
HY-B1742R
Proxyphylline (Standard)Adenosine Receptor Antagonist -
HY-124543
MRS-1191A3 Adenosine Receptor Antagonist -
![N-[(4-Aminophenyl)methyl]adenosine](https://file.medchemexpress.com/product_pic/hy-100130.gif)
HY-100130
N-[(4-Aminophenyl)methyl]adenosineAdenosine Receptor Inhibitor -
HY-13236
LUF6000A3 Adenosine Receptor Modulator -
HY-100032
PD 117519A2A Adenosine Agonist -
HY-19365
AB-MECAAdenosine Receptor Agonist -
HY-18687
APNEAA3 Adenosine Receptor Agonist
Voir tous les produits spécifiques à Isoform Adenosine Receptor
More
Activité biologique
Description
IC50 & Target
Ki: 4.9 nM (hA1AR), 4.7 nM (hA3AR)[1]
In Vitro
N6-Ethyladenosine (Compound 28) exhibits more selectivity at hA1AR and hA3AR over hA2AR (Ki, 8900±770 nM)[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only. .
Chemical Information
-
CAS No. 14357-08-5
-
Appearance Solid
-
Masse moléculaire 295.29
-
Formule C12H17N5O4
-
Color White to off-white
-
SMILES
OC[C@@H]1[C@H]([C@H]([C@H](N2C=NC3=C2N=CN=C3NCC)O1)O)O
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvant et solubilité
In Vitro:
DMSO : ≥ 83.33 mg/mL (282.20 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (7.04 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (7.04 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (274 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.3865 mL | 16.9325 mL | 33.8650 mL | 84.6625 mL |
| 5 mM | 0.6773 mL | 3.3865 mL | 6.7730 mL | 16.9325 mL | |
| 10 mM | 0.3387 mL | 1.6933 mL | 3.3865 mL | 8.4663 mL | |
| 15 mM | 0.2258 mL | 1.1288 mL | 2.2577 mL | 5.6442 mL | |
| 20 mM | 0.1693 mL | 0.8466 mL | 1.6933 mL | 4.2331 mL | |
| 25 mM | 0.1355 mL | 0.6773 mL | 1.3546 mL | 3.3865 mL | |
| 30 mM | 0.1129 mL | 0.5644 mL | 1.1288 mL | 2.8221 mL | |
| 40 mM | 0.0847 mL | 0.4233 mL | 0.8466 mL | 2.1166 mL | |
| 50 mM | 0.0677 mL | 0.3387 mL | 0.6773 mL | 1.6933 mL | |
| 60 mM | 0.0564 mL | 0.2822 mL | 0.5644 mL | 1.4110 mL | |
| 80 mM | 0.0423 mL | 0.2117 mL | 0.4233 mL | 1.0583 mL | |
| 100 mM | 0.0339 mL | 0.1693 mL | 0.3387 mL | 0.8466 mL |
N6-Ethyladenosine Related Classifications
HY-111809 Related Classifications
Powered by Bioz