Pristane
Based on 1 publication(s) in Google Scholar
Pristane (Norphytane) is a naturally occurring hydrocarbon oil found in small quantities in many plants, in various marine organisms, and as the most active component of mineral oil. Pristane is a non-antigenic adjuvant, and induces MHC class II-restricted, arthritogenic T cells in the rat.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.87%
- CAS No.: 1921-70-6
- Formule: C19H40
- Masse moléculaire:268.52
-
Stockage:Pure form -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) Pristane
More
Activité biologique
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Naive recipient rats (DA)[2]
-
Dosage:500 μL of Pristane oil
-
Administration:Intradermal injection
-
Result:Both CD4+, CD8+ αβT cells and B cells significantly expand in draining lymph nodes until day 6 after injection, whereafter the CD4+ αβT cells continue to expand until day 12 after injection.
Chemical Information
-
CAS No. 1921-70-6
-
Appearance Liquid (Density: 0.783 g/cm3)
-
Masse moléculaire 268.52
-
Formule C19H40
-
Color Colorless to light yellow
-
SMILES
CC(C)CCCC(C)CCCC(C)CCCC(C)C
-
Synonyms
Norphytane
-
Structure Classification
-
Initial Source
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Pure form -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (1)
-
Journal Impact Factor
-
Most Recent
Solvant et solubilité
DMSO : 100 mg/mL (372.41 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (9.31 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (9.31 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (267 KB)
-
SDS (392 KB)
- English - EN (392 KB)
- Français - FR (392 KB)
- Deutsch - DE (392 KB)
- Norwegian - NO (392 KB)
- Español - ES (392 KB)
- Swedish - SV (392 KB)
- Italian - IT (392 KB)
- Korean - KR (392 KB)
- Portuguese - PT (392 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. J J Turner, et al. Krypton Fluoride: Preparation by the Matrix Isolation Technique. Science. 1963 May 31;140(3570):974-5. [Content Brief]
[2]. Jens Holmberg,et al. Pristane, a non-antigenic adjuvant, induces MHC class II-restricted, arthritogenic T cells in the rat. J Immunol. 2006 Jan 15;176(2):1172-9. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.7241 mL | 18.6206 mL | 37.2412 mL | 93.1029 mL |
| 5 mM | 0.7448 mL | 3.7241 mL | 7.4482 mL | 18.6206 mL | |
| 10 mM | 0.3724 mL | 1.8621 mL | 3.7241 mL | 9.3103 mL | |
| 15 mM | 0.2483 mL | 1.2414 mL | 2.4827 mL | 6.2069 mL | |
| 20 mM | 0.1862 mL | 0.9310 mL | 1.8621 mL | 4.6551 mL | |
| 25 mM | 0.1490 mL | 0.7448 mL | 1.4896 mL | 3.7241 mL | |
| 30 mM | 0.1241 mL | 0.6207 mL | 1.2414 mL | 3.1034 mL | |
| 40 mM | 0.0931 mL | 0.4655 mL | 0.9310 mL | 2.3276 mL | |
| 50 mM | 0.0745 mL | 0.3724 mL | 0.7448 mL | 1.8621 mL | |
| 60 mM | 0.0621 mL | 0.3103 mL | 0.6207 mL | 1.5517 mL | |
| 80 mM | 0.0466 mL | 0.2328 mL | 0.4655 mL | 1.1638 mL | |
| 100 mM | 0.0372 mL | 0.1862 mL | 0.3724 mL | 0.9310 mL |
Pristane Related Classifications
HY-N7819 Related Classifications
Powered by Bioz