Chloramine-T
Based on 1 Customer Validation
Chloramine-T is a titrimetric reagent, and an oxidizing agent. Chloramine-T is an oxidizing biocide.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 98.0%
- CAS. Nr.: 127-65-1
- Formel: C7H7ClNNaO2S
- Molecular Weight:227.64
-
Speicherung:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
-
Antibacterial Compound Library
HY-L049
-
FDA Approved & Pharmacopeial Drug Library
HY-L066
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
-
Environmental Pollutant Compound Library
HY-L247
-
Anti-Infection Compound Library
HY-L002
Biologische Aktivität
Chloramine-T direct titration method[2]
1. Dilute the thiol solution (1-5 ml) with distilled water (20-30 ml).
2. Add potassium iodide (~0.5 g) and titrate with standard Chloramine-T solution, using starch (1 ml of 1 % solution), carbon tetrachloride, chloroform, carbon disulfide and benzene (2 ml) as indicators.
3. Add enough concentrated hydrochloric acid to the 2-mercaptoethanol solution to make the acid concentration 0.55 M before titration.
Chloramine-T potentiometric titration method[2]
1. Place a known volume of thiol solution (2-10 ml) in a 100 ml titration cell and dilute the solution with 50 ml of water.
2. Titrate using a potentiometric titration apparatus.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS. Nr. 127-65-1
-
Appearance Solid
-
Molecular Weight 227.64
-
Formel C7H7ClNNaO2S
-
Color White to off-white
-
SMILES
O=S(C1=CC=C(C)C=C1)(N([Na])Cl)=O
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Lösungsmittel & Löslichkeit
DMSO : 130 mg/mL (571.08 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : ≥ 41 mg/mL (180.11 mM)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 3.25 mg/mL (14.28 mM); Clear solution
This protocol yields a clear solution of ≥ 3.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (32.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 3.25 mg/mL (14.28 mM); Clear solution
This protocol yields a clear solution of ≥ 3.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (32.5 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: PBS
Solubility: 100 mg/mL (439.29 mM); Clear solution; Need ultrasonic
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Reinheit & Dokumentation
-
Data Sheet (275 KB)
-
SDS (615 KB)
- English - EN (615 KB)
- Français - FR (615 KB)
- Deutsch - DE (615 KB)
- Norwegian - NO (615 KB)
- Español - ES (615 KB)
- Swedish - SV (615 KB)
- Italian - IT (615 KB)
- Korean - KR (615 KB)
- Portuguese - PT (615 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 4.3929 mL | 21.9645 mL | 43.9290 mL | 109.8225 mL |
| 5 mM | 0.8786 mL | 4.3929 mL | 8.7858 mL | 21.9645 mL | |
| 10 mM | 0.4393 mL | 2.1965 mL | 4.3929 mL | 10.9823 mL | |
| 15 mM | 0.2929 mL | 1.4643 mL | 2.9286 mL | 7.3215 mL | |
| 20 mM | 0.2196 mL | 1.0982 mL | 2.1965 mL | 5.4911 mL | |
| 25 mM | 0.1757 mL | 0.8786 mL | 1.7572 mL | 4.3929 mL | |
| 30 mM | 0.1464 mL | 0.7322 mL | 1.4643 mL | 3.6608 mL | |
| 40 mM | 0.1098 mL | 0.5491 mL | 1.0982 mL | 2.7456 mL | |
| 50 mM | 0.0879 mL | 0.4393 mL | 0.8786 mL | 2.1965 mL | |
| 60 mM | 0.0732 mL | 0.3661 mL | 0.7322 mL | 1.8304 mL | |
| 80 mM | 0.0549 mL | 0.2746 mL | 0.5491 mL | 1.3728 mL | |
| 100 mM | 0.0439 mL | 0.2196 mL | 0.4393 mL | 1.0982 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Chloramine-T Related Classifications
HY-B0959 Related Classifications
Powered by Bioz