Dynamin IN-1
Based on 1 publication(s) in Google Scholar
Dynamin IN-1 is a potent dynamin inhibitor with an IC50 value of 1.0 µM.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.89%
- CAS. Nr.: 1345853-50-0
- Formel: C23H24N2O
- Molecular Weight:344.45
-
Speicherung:Powder -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) Dynamin IN-1
More
Biologische Aktivität
IC50: 1.0 µM (dynamin)[1]
Chemical Information
-
CAS. Nr. 1345853-50-0
-
Appearance Solid
-
Molecular Weight 344.45
-
Formel C23H24N2O
-
Color White to off-white
-
SMILES
[H]N(CC(CN1C2=CC=CC=C2C3=CC=CC=C31)O)CC4=CC=C(C=C4)C
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years In solvent -80°C 6 months -20°C 1 month
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Cell Rep
Extracellular vesicles from alveolar macrophages harboring phagocytosed methicillin-resistant Staphylococcus aureus induce necroptosis. [Abstract]2024 Jul 9;43(7):114453. PMID: 38985677
Lösungsmittel & Löslichkeit
DMSO : 100 mg/mL (290.32 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (7.26 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (271 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.9032 mL | 14.5159 mL | 29.0318 mL | 72.5795 mL |
| 5 mM | 0.5806 mL | 2.9032 mL | 5.8064 mL | 14.5159 mL | |
| 10 mM | 0.2903 mL | 1.4516 mL | 2.9032 mL | 7.2579 mL | |
| 15 mM | 0.1935 mL | 0.9677 mL | 1.9355 mL | 4.8386 mL | |
| 20 mM | 0.1452 mL | 0.7258 mL | 1.4516 mL | 3.6290 mL | |
| 25 mM | 0.1161 mL | 0.5806 mL | 1.1613 mL | 2.9032 mL | |
| 30 mM | 0.0968 mL | 0.4839 mL | 0.9677 mL | 2.4193 mL | |
| 40 mM | 0.0726 mL | 0.3629 mL | 0.7258 mL | 1.8145 mL | |
| 50 mM | 0.0581 mL | 0.2903 mL | 0.5806 mL | 1.4516 mL | |
| 60 mM | 0.0484 mL | 0.2419 mL | 0.4839 mL | 1.2097 mL | |
| 80 mM | 0.0363 mL | 0.1814 mL | 0.3629 mL | 0.9072 mL | |
| 100 mM | 0.0290 mL | 0.1452 mL | 0.2903 mL | 0.7258 mL |
Dynamin IN-1 Related Classifications
HY-152215 Related Classifications
Powered by Bioz