Notopterol
Based on 3 publication(s) in Google Scholar
Notopterol is a coumarin extracted from N. incisum. Notopterol induces apoptosis and has antipyretic, analgesic and anti-inflammatory effects. Notopterol is used for acute myeloid leukemia (AML).
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.84%
- CAS No.: 88206-46-6
- Formule: C21H22O5
- Masse moléculaire:354.40
-
Stockage:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Publications Citing Use of MedChemExpress (MCE) Notopterol
More-
Cell Proliferation/Viability Assay
-
WB
-
Cell Migration/Invasion Assay
-
IF
-
Flow Cytometry
Activité biologique
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| HepG2 | IC50 |
>20 μM
Compound: Notopterol
|
Cytotoxicity in human HepG2 cells assessed as reduction in cell viability incubated for 48 hrs by MTT assay
Cytotoxicity in human HepG2 cells assessed as reduction in cell viability incubated for 48 hrs by MTT assay
|
[PMID: 36007469] |
| SH-SY5Y | IC50 |
>20 μM
Compound: Notopterol
|
Cytotoxicity in human SH-SY5Y cells assessed as reduction in cell viability incubated for 48 hrs by MTT assay
Cytotoxicity in human SH-SY5Y cells assessed as reduction in cell viability incubated for 48 hrs by MTT assay
|
[PMID: 36007469] |
notopterol (5, 10, 20, 40, 60 μM; for 48 hours) promotes cell apoptosis in a dose-dependent manner[1].
notopterol (10, 20, 40, 60 and 80 μM; 24-120 hours) inhibits the proliferation of HL-60 cells in a concentration-dependent manner[1].
Notopterol (5, 10, 20 and 40 μM; for 48 hours) induces G0/G1 phase arrest associated with cell-cycle proteins in HL-60 cells[1].
Notopterol (5, 10, 20 and 40 μM; for 48 hours) increases the expression of Bax and decreased the expression of Bcl-2 and Mcl-1 in HL-60 cells after 48-hr treatment. Moreover, Notopterol also promotes the cleavage of caspase 9, caspase 3 and PARP[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 88206-46-6
-
Appearance Solid
-
Masse moléculaire 354.40
-
Formule C21H22O5
-
Color White to off-white
-
SMILES
O=C1C=CC2=C(OC/C=C(C)/CC(O)/C=C(C)/C)C3=C(OC=C3)C=C2O1
-
Structure Classification
-
Initial Source
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Publications (3)
-
Journal Impact Factor
-
Most Recent
-
Nutrients
Furanocoumarin Notopterol: Inhibition of Hepatocellular Carcinogenesis through Suppression of Cancer Stemness Signaling and Induction of Oxidative Stress-Associated Cell Death. [Abstract]2023 May 24;15(11):2447. PMID: 37299411
Notopterol purchased from MedChemExpress. Usage Cited in: Nutrients. 2023 May 24;15(11):2447. [Abstract]
Line graphs showing the effect of 0–100 μM Notopterol on the viability of HepJ5 and Mahlavu cell lines at 24, 48, and 72 h.
Notopterol purchased from MedChemExpress. Usage Cited in: Nutrients. 2023 May 24;15(11):2447. [Abstract]
Representative Western blot images showing the effect of 30 μM Notopterol on the expression levels of ATF4, p-JAK2, JAK2, GPX1, CAT and SOD1 in HepJ5 or Mahlavu cell lines at 0, 24, and 48 h.
Notopterol purchased from MedChemExpress. Usage Cited in: Nutrients. 2023 May 24;15(11):2447. [Abstract]
Notopterol (15, 30 μM) significantly attenuates HCC cell migration and invasive capacity.
Notopterol purchased from MedChemExpress. Usage Cited in: Nutrients. 2023 May 24;15(11):2447. [Abstract]
Fluorescence signal of DCFH-DA staining in HepJ5 or Mahlavu cell lines treated with 0–30 μM Notopterol (NOT).
Notopterol purchased from MedChemExpress. Usage Cited in: Nutrients. 2023 May 24;15(11):2447. [Abstract]
Flow cytometry analysis showing the effect of pre-treatment with 30 μM Notopterol (NOT) or 30 mM Sora on Hoechst 33342 staining in cells dissociated from tumors harvested from the 30 μM NOT or 30 μM Sora xenografted mice group, in the absence or presence of Vera. The SP cells were gated and shown as a percentage as indicated.
-
Bioorg Chem
Interpretable machine learning and molecular simulations identify natural pancreatic lipase inhibitors and hydrophobic hotspot residues. [Abstract]2026 Jul 15:176:109873. PMID: 41997005 -
Vet Microbiol
Identification and evaluation of Nordihydroguaiaretic acid (NDGA) as an active traditional Chinese medicine compound inhibiting the 3C-like protease of feline infectious peritonitis virus. [Abstract]2025 Sep 15:310:110730. PMID: 40976146
Solvant et solubilité
DMSO : 100 mg/mL (282.17 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 2.5 mg/mL (7.05 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 2.5 mg/mL (7.05 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (275 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.8217 mL | 14.1084 mL | 28.2167 mL | 70.5418 mL |
| 5 mM | 0.5643 mL | 2.8217 mL | 5.6433 mL | 14.1084 mL | |
| 10 mM | 0.2822 mL | 1.4108 mL | 2.8217 mL | 7.0542 mL | |
| 15 mM | 0.1881 mL | 0.9406 mL | 1.8811 mL | 4.7028 mL | |
| 20 mM | 0.1411 mL | 0.7054 mL | 1.4108 mL | 3.5271 mL | |
| 25 mM | 0.1129 mL | 0.5643 mL | 1.1287 mL | 2.8217 mL | |
| 30 mM | 0.0941 mL | 0.4703 mL | 0.9406 mL | 2.3514 mL | |
| 40 mM | 0.0705 mL | 0.3527 mL | 0.7054 mL | 1.7635 mL | |
| 50 mM | 0.0564 mL | 0.2822 mL | 0.5643 mL | 1.4108 mL | |
| 60 mM | 0.0470 mL | 0.2351 mL | 0.4703 mL | 1.1757 mL | |
| 80 mM | 0.0353 mL | 0.1764 mL | 0.3527 mL | 0.8818 mL | |
| 100 mM | 0.0282 mL | 0.1411 mL | 0.2822 mL | 0.7054 mL |