YQ456
Based on 1 Customer Validation
YQ456 is a novel small molecule inhibitor of myoferlin that showed high binding affinity to myoferlin with a KD of 37 nM and excellent anti-invasion capability with an IC50 of 110 nM.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.84%
- CAS No.: 2093946-08-6
- Formule: C28H30N4O2
- Masse moléculaire:454.56
-
Stockage:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Activité biologique
|
MYOF 110 nM (IC50) |
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| PANC-1 | IC50 |
0.14 μM
Compound: 6p
|
Antimigratory activity against human PANC1 cells measured after 18 hrs in presence of mitomycin C using crystal violet staining by inverted microscopy-based transwell assay
Antimigratory activity against human PANC1 cells measured after 18 hrs in presence of mitomycin C using crystal violet staining by inverted microscopy-based transwell assay
|
[PMID: 31026162] |
| PANC-1 | IC50 |
0.18 μM
Compound: 6p
|
Antiinvasive activity against human PANC1 cells measured after 18 hrs in presence of mitomycin C using crystal violet staining by inverted microscopy-based matrigel coated transwell assay
Antiinvasive activity against human PANC1 cells measured after 18 hrs in presence of mitomycin C using crystal violet staining by inverted microscopy-based matrigel coated transwell assay
|
[PMID: 31026162] |
Chemical Information
-
CAS No. 2093946-08-6
-
Appearance Solid
-
Masse moléculaire 454.56
-
Formule C28H30N4O2
-
Color White to off-white
-
SMILES
O=C(NCCCCC1=CC=CC=C1)C2=CC=CC(N3N=C(CC)N=C3C4=CC=C(OC)C=C4)=C2
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Solvant et solubilité
DMSO : 100 mg/mL (219.99 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5 mg/mL (11.00 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (270 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.1999 mL | 10.9996 mL | 21.9993 mL | 54.9982 mL |
| 5 mM | 0.4400 mL | 2.1999 mL | 4.3999 mL | 10.9996 mL | |
| 10 mM | 0.2200 mL | 1.1000 mL | 2.1999 mL | 5.4998 mL | |
| 15 mM | 0.1467 mL | 0.7333 mL | 1.4666 mL | 3.6665 mL | |
| 20 mM | 0.1100 mL | 0.5500 mL | 1.1000 mL | 2.7499 mL | |
| 25 mM | 0.0880 mL | 0.4400 mL | 0.8800 mL | 2.1999 mL | |
| 30 mM | 0.0733 mL | 0.3667 mL | 0.7333 mL | 1.8333 mL | |
| 40 mM | 0.0550 mL | 0.2750 mL | 0.5500 mL | 1.3750 mL | |
| 50 mM | 0.0440 mL | 0.2200 mL | 0.4400 mL | 1.1000 mL | |
| 60 mM | 0.0367 mL | 0.1833 mL | 0.3667 mL | 0.9166 mL | |
| 80 mM | 0.0275 mL | 0.1375 mL | 0.2750 mL | 0.6875 mL | |
| 100 mM | 0.0220 mL | 0.1100 mL | 0.2200 mL | 0.5500 mL |
YQ456 Related Classifications
HY-143539 Related Classifications
Powered by Bioz