AP-C2
Based on 1 Customer Validation
AP-C2 is a potent guanosine 3',5'-cyclic monophosphate (cGMP)-dependent protein kinase II (cGKII) inhibitor with a pIC50 of 5.2.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.42%
- CAS. Nr.: 682793-07-3
- Formel: C18H16N4S
- Molecular Weight:320.41
-
Speicherung:Powder -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Biologische Aktivität
pIC50: 5.2 (cGKII)[1]
Chemical Information
-
CAS. Nr. 682793-07-3
-
Appearance Powder
-
Molecular Weight 320.41
-
Formel C18H16N4S
-
SMILES
C1(C2=CC=CS2)=CC=NC(NCCC3=CNC4=C3C=CC=C4)=N1
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years In solvent -80°C 6 months -20°C 1 month
Lösungsmittel & Löslichkeit
DMSO : ≥ 100 mg/mL (312.10 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (7.80 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.1210 mL | 15.6050 mL | 31.2100 mL | 78.0250 mL |
| 5 mM | 0.6242 mL | 3.1210 mL | 6.2420 mL | 15.6050 mL | |
| 10 mM | 0.3121 mL | 1.5605 mL | 3.1210 mL | 7.8025 mL | |
| 15 mM | 0.2081 mL | 1.0403 mL | 2.0807 mL | 5.2017 mL | |
| 20 mM | 0.1561 mL | 0.7803 mL | 1.5605 mL | 3.9013 mL | |
| 25 mM | 0.1248 mL | 0.6242 mL | 1.2484 mL | 3.1210 mL | |
| 30 mM | 0.1040 mL | 0.5202 mL | 1.0403 mL | 2.6008 mL | |
| 40 mM | 0.0780 mL | 0.3901 mL | 0.7803 mL | 1.9506 mL | |
| 50 mM | 0.0624 mL | 0.3121 mL | 0.6242 mL | 1.5605 mL | |
| 60 mM | 0.0520 mL | 0.2601 mL | 0.5202 mL | 1.3004 mL | |
| 80 mM | 0.0390 mL | 0.1951 mL | 0.3901 mL | 0.9753 mL | |
| 100 mM | 0.0312 mL | 0.1561 mL | 0.3121 mL | 0.7803 mL |
AP-C2 Related Classifications
HY-153538 Related Classifications
Powered by Bioz