Sulcotrione
Based on 1 publication(s) in Google Scholar
Sulcotrione is a β-triketone herbicide which can inhibit hydroxyphenylpyruvate dioxygenase (HPPD).
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 99.89%
- No. CAS: 99105-77-8
- Fòrmula: C14H13ClO5S
- Peso molecular:328.77
-
Almacenamiento:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Protocolo
- Pureza y Documentación
- Referencias
-
Help & FAQs
-
Immunology/Inflammation Compound Library
HY-L007
-
Metabolism/Protease Compound Library
HY-L012
-
NF-κB Signaling Compound Library
HY-L014
-
Anti-Aging Compound Library
HY-L034
-
Human Metabolite Library
HY-L123
-
Cysteine Targeted Covalent Library
HY-L153
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
Pesticide Compound Library
HY-L183
-
Protein Kinase Compound Library
HY-L196
-
High-Throughput Bioactive Compound Library
HY-L205
-
Mass Spectrometry Human Metabolite Library
HY-L215
-
Environmental Pollutant Compound Library
HY-L247
-
Lactylation Compound Library
HY-L249
Publications Citing Use of MedChemExpress (MCE) Sulcotrione
More
Actividad biológica
HPPD[1]
The results show that sulcotrione behaves as time-independent reversible inhibitor. Similar results are previously described for natural β-triketones, and for the synthetic β-triketone NTBC. However it is the first time that such behavior is observed using a purified hydroxyphenylpyruvate dioxygenase (HPPD) and a synthetic β-triketone, namely sulcotrione. Inhibition kinetic analysis, performing with 3 hydroxyphenylpyruvate (HPP) and sulcotrione concentrations, show that the apparent KM increasing with sulcotrione concentration. This behavior is consistent with the data present in the literature, describing sulcotrione as a competitive inhibitor of HPPD[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
No. CAS 99105-77-8
-
Appearance Solid
-
Peso molecular 328.77
-
Fòrmula C14H13ClO5S
-
Color White to off-white
-
SMILES
O=C(C1C(CCCC1=O)=O)C2=C(C=C(S(C)(=O)=O)C=C2)Cl
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
ACS Environ Au
Machine Learning-Assisted Recognition of Environmental Sulfur-Containing Chemicals in Nontargeted Mass Spectrometry Analysis of Inadequate Mass Resolution. [Abstract]2025 Aug 5;5(6):573-582. PMID: 41277996
Solvente y solubilidad
DMSO : 100 mg/mL (304.16 mM; Need ultrasonic and warming; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : < 0.1 mg/mL (insoluble)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (7.60 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (7.60 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocolo
Electrochemical behavior of sulcotrione at 0.2 mg/L is characterized by cyclic voltammetry. Preliminary HPPD inhibition assays are performed by incubating the enzyme during time periods ranging from 2 to 10 min in presence of sulcotrione at differnt concentrations[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Pureza y Documentación
-
Ficha de datos (277 KB)
-
SDS (622 KB)
- English - EN (622 KB)
- Français - FR (622 KB)
- Deutsch - DE (622 KB)
- Norwegian - NO (622 KB)
- Español - ES (622 KB)
- Swedish - SV (622 KB)
- Italian - IT (622 KB)
- Korean - KR (622 KB)
- Portuguese - PT (622 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.0416 mL | 15.2082 mL | 30.4164 mL | 76.0410 mL |
| 5 mM | 0.6083 mL | 3.0416 mL | 6.0833 mL | 15.2082 mL | |
| 10 mM | 0.3042 mL | 1.5208 mL | 3.0416 mL | 7.6041 mL | |
| 15 mM | 0.2028 mL | 1.0139 mL | 2.0278 mL | 5.0694 mL | |
| 20 mM | 0.1521 mL | 0.7604 mL | 1.5208 mL | 3.8021 mL | |
| 25 mM | 0.1217 mL | 0.6083 mL | 1.2167 mL | 3.0416 mL | |
| 30 mM | 0.1014 mL | 0.5069 mL | 1.0139 mL | 2.5347 mL | |
| 40 mM | 0.0760 mL | 0.3802 mL | 0.7604 mL | 1.9010 mL | |
| 50 mM | 0.0608 mL | 0.3042 mL | 0.6083 mL | 1.5208 mL | |
| 60 mM | 0.0507 mL | 0.2535 mL | 0.5069 mL | 1.2674 mL | |
| 80 mM | 0.0380 mL | 0.1901 mL | 0.3802 mL | 0.9505 mL | |
| 100 mM | 0.0304 mL | 0.1521 mL | 0.3042 mL | 0.7604 mL |
Sulcotrione Related Classifications
HY-107368 Related Classifications
Powered by Bioz