Dixanthogen
Based on 2 publication(s) in Google Scholar
Dixanthogen is a dimer of xanthate, which forms via the oxidation of xanthate. Dixanthogen can decompose peroxides, which are key radical initiators for the oxidative degradation of polypropylene. Dixanthogen serves as a stabilizer for polypropylene, a pediculicide, and is also used in studies related to metal recovery.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza : 98.0%
- No. CAS: 502-55-6
- Fòrmula: C6H10O2S4
- Peso molecular:242.40
-
Almacenamiento:Pure form -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
- Referencias
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) Dixanthogen
More
Actividad biológica
Descripciòn
In Vitro
Dixanthogen provides protection against melt degradation and thermo-oxidative degradation for polypropylene under oxygen-limited/oxygen-rich processing conditions. Compared with metal octyl xanthates, it shows smaller performance fluctuations under both types of conditions, and exhibits better thermo-oxidative protection efficacy than nickel octyl xanthate in oxygen-rich environments[1].
Dixanthogen protects polypropylene from ultraviolet degradation, but this effect is regulated by processing atmosphere[1].
Dixanthogen possesses inferior photo‑oxidation stabilizing performance for polypropylene compared with nickel octyl xanthate and cobalt octyl xanthate[1].
Dixanthogen is a dimer of xanthate, which has higher stability than xanthate and can be produced by the oxidation of xanthate[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only. .
Chemical Information
-
No. CAS 502-55-6
-
Appearance Liquid (Density: 1.352 g/cm3)
-
Peso molecular 242.40
-
Fòrmula C6H10O2S4
-
Color Colorless to light yellow
-
SMILES
CCOC(SSC(OCC)=S)=S
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Pure form -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (2)
-
Journal Impact Factor
-
Most Recent
-
Anal Sci
The effect of experimental conditions on the formation of dixanthogen by triiodide oxidation in the determination of ethyl xanthate by HPLC-ICP-MS/MS. [Abstract]2022 Sep;38(9):1221-1231. PMID: 35796995 -
Solvente y solubilidad
In Vitro:
DMSO : 250 mg/mL (1031.35 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 6.25 mg/mL (25.78 mM); Clear solution
This protocol yields a clear solution of ≥ 6.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (62.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 6.25 mg/mL (25.78 mM); Clear solution
This protocol yields a clear solution of ≥ 6.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (62.5 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (277 KB)
-
SDS (392 KB)
- English - EN (392 KB)
- Français - FR (392 KB)
- Deutsch - DE (392 KB)
- Norwegian - NO (392 KB)
- Español - ES (392 KB)
- Swedish - SV (392 KB)
- Italian - IT (392 KB)
- Korean - KR (392 KB)
- Portuguese - PT (392 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 4.1254 mL | 20.6271 mL | 41.2541 mL | 103.1353 mL |
| 5 mM | 0.8251 mL | 4.1254 mL | 8.2508 mL | 20.6271 mL | |
| 10 mM | 0.4125 mL | 2.0627 mL | 4.1254 mL | 10.3135 mL | |
| 15 mM | 0.2750 mL | 1.3751 mL | 2.7503 mL | 6.8757 mL | |
| 20 mM | 0.2063 mL | 1.0314 mL | 2.0627 mL | 5.1568 mL | |
| 25 mM | 0.1650 mL | 0.8251 mL | 1.6502 mL | 4.1254 mL | |
| 30 mM | 0.1375 mL | 0.6876 mL | 1.3751 mL | 3.4378 mL | |
| 40 mM | 0.1031 mL | 0.5157 mL | 1.0314 mL | 2.5784 mL | |
| 50 mM | 0.0825 mL | 0.4125 mL | 0.8251 mL | 2.0627 mL | |
| 60 mM | 0.0688 mL | 0.3438 mL | 0.6876 mL | 1.7189 mL | |
| 80 mM | 0.0516 mL | 0.2578 mL | 0.5157 mL | 1.2892 mL | |
| 100 mM | 0.0413 mL | 0.2063 mL | 0.4125 mL | 1.0314 mL |
Dixanthogen Related Classifications
HY-B1186 Related Classifications
Powered by Bioz