KCC2 Modulator-2
Based on 1 Customer Validation
KCC2 Modulator-2 (example 53) is a KCC2 modulator with an EC50 of 0.215 μM. KCC2 Modulator-2 can be used in the study of neurological disorders.
For research use only. We do not sell to patients.
- CAS No.: 2704531-37-1
- Formula: C35H45N5O3
- Molecular Weight:583.76
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
Biological Activity
Chemical Information
-
CAS No. 2704531-37-1
-
Appearance Solid
-
Molecular Weight 583.76
-
Formula C35H45N5O3
-
Color White to off-white
-
SMILES
O=C1C2=C(CN1C(C)C)C(NC3=CC=C(C4=CC=C(OCCCCCCC)C=C4)C=C3)=NC(N5CCOC(C6CC6)C5)=N2
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 100 mg/mL (171.30 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5 mg/mL (8.57 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (267 KB)
-
SDS (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.7130 mL | 8.5652 mL | 17.1303 mL | 42.8258 mL |
| 5 mM | 0.3426 mL | 1.7130 mL | 3.4261 mL | 8.5652 mL | |
| 10 mM | 0.1713 mL | 0.8565 mL | 1.7130 mL | 4.2826 mL | |
| 15 mM | 0.1142 mL | 0.5710 mL | 1.1420 mL | 2.8551 mL | |
| 20 mM | 0.0857 mL | 0.4283 mL | 0.8565 mL | 2.1413 mL | |
| 25 mM | 0.0685 mL | 0.3426 mL | 0.6852 mL | 1.7130 mL | |
| 30 mM | 0.0571 mL | 0.2855 mL | 0.5710 mL | 1.4275 mL | |
| 40 mM | 0.0428 mL | 0.2141 mL | 0.4283 mL | 1.0706 mL | |
| 50 mM | 0.0343 mL | 0.1713 mL | 0.3426 mL | 0.8565 mL | |
| 60 mM | 0.0286 mL | 0.1428 mL | 0.2855 mL | 0.7138 mL | |
| 80 mM | 0.0214 mL | 0.1071 mL | 0.2141 mL | 0.5353 mL | |
| 100 mM | 0.0171 mL | 0.0857 mL | 0.1713 mL | 0.4283 mL |
KCC2 Modulator-2 Related Classifications
HY-160082 Related Classifications
Powered by Bioz