Lithium acetate dihydrate
Based on 1 Customer Validation
Lithium acetate dihydrate is an organolithium salt that serves as a precursor for lithium dopants, and is used for lithium doping in the preparation of lithium-doped nickel oxide thin films via ultrasonic spray pyrolysis.
For research use only. We do not sell to patients.
- Purity: 99.0%
- CAS No.: 6108-17-4
- Formula: CH3COOLi·2H2O
- Molecular Weight:102.02
-
Storage:
Store at room temperature, keep dry and cool.
In solvent -80°C, 1 year , -20°C, 6 months
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
Biological Activity
Lithium acetate dihydrate (5-20 mol%; 25 min) as a dopant precursor enables fabrication of p-type polycrystalline NiO thin films via ultrasonic spray pyrolysis[1].
Lithium acetate dihydrate (10 mol%; 25 min) as a dopant precursor for NiO:Li (10%) thin films functions effectively as hole-transporting and electron-blocking layers in an inorganic LED, enabling rectifying behavior and narrow-band electroluminescence at ~582 nm with a 4.0 V threshold voltage[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 6108-17-4
-
Appearance Solid
-
Molecular Weight 102.02
-
Formula CH3COOLi·2H2O
-
Color White to off-white
-
SMILES
[Li].O=C(O)C.O
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Store at room temperature, keep dry and cool
In solvent -80°C 1 year -20°C 6 months
Solvent & Solubility
DMSO : 100 mg/mL (980.20 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 100 mg/mL (980.20 mM; Need ultrasonic)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 1 year; -20°C, 6 months. When stored at -80°C, please use it within 1 year. When stored at -20°C, please use it within 6 months.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 1 year; -20°C, 6 months. When stored at -80°C, please use it within 1 year. When stored at -20°C, please use it within 6 months.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5 mg/mL (49.01 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 5 mg/mL (49.01 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Purity & Documentation
-
Data Sheet (269 KB)
-
SDS (480 KB)
- English - EN (480 KB)
- Français - FR (480 KB)
- Deutsch - DE (480 KB)
- Norwegian - NO (480 KB)
- Español - ES (480 KB)
- Swedish - SV (480 KB)
- Italian - IT (480 KB)
- Korean - KR (480 KB)
- Portuguese - PT (480 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 1 year; -20°C, 6 months. When stored at -80°C, please use it within 1 year. When stored at -20°C, please use it within 6 months.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO / H2O | 1 mM | 9.8020 mL | 49.0100 mL | 98.0200 mL | 245.0500 mL |
| 5 mM | 1.9604 mL | 9.8020 mL | 19.6040 mL | 49.0100 mL | |
| 10 mM | 0.9802 mL | 4.9010 mL | 9.8020 mL | 24.5050 mL | |
| 15 mM | 0.6535 mL | 3.2673 mL | 6.5347 mL | 16.3367 mL | |
| 20 mM | 0.4901 mL | 2.4505 mL | 4.9010 mL | 12.2525 mL | |
| 25 mM | 0.3921 mL | 1.9604 mL | 3.9208 mL | 9.8020 mL | |
| 30 mM | 0.3267 mL | 1.6337 mL | 3.2673 mL | 8.1683 mL | |
| 40 mM | 0.2450 mL | 1.2252 mL | 2.4505 mL | 6.1262 mL | |
| 50 mM | 0.1960 mL | 0.9802 mL | 1.9604 mL | 4.9010 mL | |
| 60 mM | 0.1634 mL | 0.8168 mL | 1.6337 mL | 4.0842 mL | |
| 80 mM | 0.1225 mL | 0.6126 mL | 1.2252 mL | 3.0631 mL | |
| 100 mM | 0.0980 mL | 0.4901 mL | 0.9802 mL | 2.4505 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Lithium acetate dihydrate Related Classifications
HY-W094471 Related Classifications
Powered by Bioz