(-)-FRM-024
Based on 1 Customer Validation
(-)-FRM-024 is the (-)-isomer of FRM-024, a potent CNS-penetrant gamma secretase modulator that can be utilized in Alzheimer’s disease research.
For research use only. We do not sell to patients.
- Purity: 98.27%
- CAS No.: 2085780-85-2
- Formula: C22H22ClN5O2
- Molecular Weight:423.90
-
Storage:
4°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
Biological Activity
Chemical Information
-
CAS No. 2085780-85-2
-
Appearance Solid
-
Molecular Weight 423.90
-
Formula C22H22ClN5O2
-
Color Off-white to light yellow
-
SMILES
ClC1=CC=C(C=C1)[C@H]2[C@@H](C3CC3)ON=C(C4=CC=C(N5C=C(N=C5)C)C(OC)=N4)N2
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
Solvent & Solubility
DMSO : 100 mg/mL (235.90 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.90 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (271 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.3590 mL | 11.7952 mL | 23.5905 mL | 58.9762 mL |
| 5 mM | 0.4718 mL | 2.3590 mL | 4.7181 mL | 11.7952 mL | |
| 10 mM | 0.2359 mL | 1.1795 mL | 2.3590 mL | 5.8976 mL | |
| 15 mM | 0.1573 mL | 0.7863 mL | 1.5727 mL | 3.9317 mL | |
| 20 mM | 0.1180 mL | 0.5898 mL | 1.1795 mL | 2.9488 mL | |
| 25 mM | 0.0944 mL | 0.4718 mL | 0.9436 mL | 2.3590 mL | |
| 30 mM | 0.0786 mL | 0.3932 mL | 0.7863 mL | 1.9659 mL | |
| 40 mM | 0.0590 mL | 0.2949 mL | 0.5898 mL | 1.4744 mL | |
| 50 mM | 0.0472 mL | 0.2359 mL | 0.4718 mL | 1.1795 mL | |
| 60 mM | 0.0393 mL | 0.1966 mL | 0.3932 mL | 0.9829 mL | |
| 80 mM | 0.0295 mL | 0.1474 mL | 0.2949 mL | 0.7372 mL | |
| 100 mM | 0.0236 mL | 0.1180 mL | 0.2359 mL | 0.5898 mL |