NVS-STG2
Based on 1 publication(s) in Google Scholar
NVS-STG2 is a molecular glue that targets STINGSTING by binding to pockets between adjacent STING dimer transmembrane domains, effectively acting as a molecular glue. NVS-STGI enhances the activity of cGAMP by inducing the formation of more abundant and larger oligomers. NVS-STG2 produces antitumor activity in animal models.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.76%
- CAS. Nr.: 3030588-01-0
- Formel: C25H33NO5
- Molecular Weight:427.53
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Publications Citing Use of MedChemExpress (MCE) NVS-STG2
More
Biologische Aktivität
NVS-STG2 (50 μM; 24 h) strongly induces ISRE-Luc reporter gene expression in a reporter gene assay in THP1-Dual cells, AC50=5.2 μM[1].
NVS-STG2 (50 μM; 16 h) induces STING-dependent IRF3 phosphorylation in a STING co-transfection reporter gene assay in HEK293T cells[1].
NVS-STG2 (50 μM; 16 h) causes wild-type STING to form bright punctate structures in a STING translocation/aggregation assay in 293T cells, but not the R95A mutant[1].
NVS-STG2 (40 μM; 16 h) induces the formation of higher-order oligomers of hSTING in native gel analysis of purified hSTING protein[1].
NVS-STG2 (50 μM) induces high levels of IFNβ production in human peripheral blood mononuclear cells (PBMCs), comparable to cGAMP[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:HEK293T
-
Concentration:50 μM
-
Incubation Time:overnight
-
Result:Induced STING-dependent IRF3 phosphorylation.
NVS-STG2 (400 μg, 800 μg; intratumoral injection; 1 time; day 8) can induce significant dose-dependent T cell priming responses in the B16-SIY tumor model of hSTING gene knock-in mice[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Female C57BL/6 wild-type and hSTING knock-in mice (10-12 weeks old, 20-25 g) with MC38 flank tumors and B16-SIY flank tumors[1]
-
Dosage:800 μg, 400 μg (not specified in the article about the solvent)
-
Administration:For the MC38 tumor model, intratumoral injection, 3 times, on days 11, 14, and 18. For the B16-SIY tumor model, intratumoral injection, single dose, on day 8
-
Result:In the MC38 tumor model, slowed tumor growth significantly, and resulted in no significant tumor growth among 4/9 mouse during the 33-day experimental period.
In the B16-SIY tumor model, exhibited a dose-dependent and significant induction of T-cell priming response. Resulted a significant increase in plasma IFNγ level at 6 h after dosing.
Chemical Information
-
CAS. Nr. 3030588-01-0
-
Appearance Solid
-
Molecular Weight 427.53
-
Formel C25H33NO5
-
Color White to off-white
-
SMILES
COC1=C(C=CC(C(O)=O)=C1)NCC2=CC=C(C=C2)C3(OCC(C)(CO3)C)C(C)(C)C
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Immunity
A chemical agonist and the Golgi-resident lipid PI4P activate STING by inducing transmembrane helix rearrangement. [Abstract]2025 Dec 5:S1074-7613(25)00506-0. PMID: 41352342
Lösungsmittel & Löslichkeit
DMSO : 100 mg/mL (233.90 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 2.5 mg/mL (5.85 mM); Clear solution; Need ultrasonic
This protocol yields a clear solution of 2.5 mg/mL.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 2.5 mg/mL (5.85 mM); Clear solution; Need ultrasonic
This protocol yields a clear solution of 2.5 mg/mL.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (276 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.3390 mL | 11.6951 mL | 23.3902 mL | 58.4754 mL |
| 5 mM | 0.4678 mL | 2.3390 mL | 4.6780 mL | 11.6951 mL | |
| 10 mM | 0.2339 mL | 1.1695 mL | 2.3390 mL | 5.8475 mL | |
| 15 mM | 0.1559 mL | 0.7797 mL | 1.5593 mL | 3.8984 mL | |
| 20 mM | 0.1170 mL | 0.5848 mL | 1.1695 mL | 2.9238 mL | |
| 25 mM | 0.0936 mL | 0.4678 mL | 0.9356 mL | 2.3390 mL | |
| 30 mM | 0.0780 mL | 0.3898 mL | 0.7797 mL | 1.9492 mL | |
| 40 mM | 0.0585 mL | 0.2924 mL | 0.5848 mL | 1.4619 mL | |
| 50 mM | 0.0468 mL | 0.2339 mL | 0.4678 mL | 1.1695 mL | |
| 60 mM | 0.0390 mL | 0.1949 mL | 0.3898 mL | 0.9746 mL | |
| 80 mM | 0.0292 mL | 0.1462 mL | 0.2924 mL | 0.7309 mL | |
| 100 mM | 0.0234 mL | 0.1170 mL | 0.2339 mL | 0.5848 mL |