PS47
Based on 1 Customer Validation
PS47 is an inactive E-isomer of PS48. PS48 is an activator of PDK1. PS47 can be used as a negative control for PS48.
For research use only. We do not sell to patients.
- Purity: 99.13%
- CAS No.: 1180676-33-8
- Formula: C17H15ClO2
- Molecular Weight:286.75
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biological Activity
PS47 shows very low binding affinity or no binding to PDK1 (Kd>200 µM)[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 1180676-33-8
-
Appearance Solid
-
Molecular Weight 286.75
-
Formula C17H15ClO2
-
Color White to off-white
-
SMILES
O=C(O)/C=C(C1=CC=CC=C1)\CCC2=CC=C(Cl)C=C2
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 100 mg/mL (348.74 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 2.5 mg/mL (8.72 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (272 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
[1]. Hindie V, et, al. Structure and allosteric effects of low-molecular-weight activators on the protein kinase PDK1. Nat Chem Biol. 2009 Oct;5(10):758-64. [Content Brief]
[2]. Pastor-Flores D, et, al. PIF-pocket as a target for C. albicans Pkh selective inhibitors. ACS Chem Biol. 2013 Oct 18;8(10):2283-92. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.4874 mL | 17.4368 mL | 34.8736 mL | 87.1840 mL |
| 5 mM | 0.6975 mL | 3.4874 mL | 6.9747 mL | 17.4368 mL | |
| 10 mM | 0.3487 mL | 1.7437 mL | 3.4874 mL | 8.7184 mL | |
| 15 mM | 0.2325 mL | 1.1625 mL | 2.3249 mL | 5.8123 mL | |
| 20 mM | 0.1744 mL | 0.8718 mL | 1.7437 mL | 4.3592 mL | |
| 25 mM | 0.1395 mL | 0.6975 mL | 1.3949 mL | 3.4874 mL | |
| 30 mM | 0.1162 mL | 0.5812 mL | 1.1625 mL | 2.9061 mL | |
| 40 mM | 0.0872 mL | 0.4359 mL | 0.8718 mL | 2.1796 mL | |
| 50 mM | 0.0697 mL | 0.3487 mL | 0.6975 mL | 1.7437 mL | |
| 60 mM | 0.0581 mL | 0.2906 mL | 0.5812 mL | 1.4531 mL | |
| 80 mM | 0.0436 mL | 0.2180 mL | 0.4359 mL | 1.0898 mL | |
| 100 mM | 0.0349 mL | 0.1744 mL | 0.3487 mL | 0.8718 mL |