Pseudolaric Acid C2
Based on 1 Customer Validation
Pseudolaric Acid C2, a diterpenoid isolated from Pseudolarix kaempferi, is identified as the specific metabolite of Pseudolaric acid B in plasma, urine, bile and feces after both oral and intravenous administration to rats.
For research use only. We do not sell to patients.
- Purity: 99.17%
- CAS No.: 82508-35-8
- Formula: C22H26O8
- Molecular Weight:418.44
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biological Activity
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| BGC-823 | IC50 |
>100 μM
Compound: 9
|
Cytotoxicity against human BGC823 cells after 48 hrs by MTT assay
Cytotoxicity against human BGC823 cells after 48 hrs by MTT assay
|
[PMID: 17291040] |
| HL-60 | IC50 |
>10 μM
Compound: 4, pseudolaric acid C2
|
Antiproliferative activity against human HL60 cells by SRB assay
Antiproliferative activity against human HL60 cells by SRB assay
|
[PMID: 18078313] |
| HMEC-1 | IC50 |
>10 μM
Compound: 4, pseudolaric acid C2
|
Antiproliferative activity against HMEC1 cells by SRB assay
Antiproliferative activity against HMEC1 cells by SRB assay
|
[PMID: 18078313] |
Chemical Information
-
CAS No. 82508-35-8
-
Appearance Solid
-
Molecular Weight 418.44
-
Formula C22H26O8
-
Color Off-white to gray
-
SMILES
CC(O[C@]12[C@@]3(CC=C(C(O)=O)CC2)C(O[C@@](/C=C/C=C(C)/C(O)=O)(C)[C@]1([H])CC3)=O)=O
-
Structure Classification
-
Initial Source
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 50 mg/mL (119.49 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.97 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (5.97 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (272 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
[1]. Liu P, et al. Simultaneous determination of seven major diterpenoids in Pseudolarix kaempferi by high-performance liquid chromatography DAD method. J Pharm Biomed Anal. 2007 Jul 27;44(3):730-6. [Content Brief]
[2]. Liu P, et al. [Metabolic pathway and metabolites of pseudolaric acid B]. Yao Xue Xue Bao. 2011 Nov;46(11):1361-5. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.3898 mL | 11.9491 mL | 23.8983 mL | 59.7457 mL |
| 5 mM | 0.4780 mL | 2.3898 mL | 4.7797 mL | 11.9491 mL | |
| 10 mM | 0.2390 mL | 1.1949 mL | 2.3898 mL | 5.9746 mL | |
| 15 mM | 0.1593 mL | 0.7966 mL | 1.5932 mL | 3.9830 mL | |
| 20 mM | 0.1195 mL | 0.5975 mL | 1.1949 mL | 2.9873 mL | |
| 25 mM | 0.0956 mL | 0.4780 mL | 0.9559 mL | 2.3898 mL | |
| 30 mM | 0.0797 mL | 0.3983 mL | 0.7966 mL | 1.9915 mL | |
| 40 mM | 0.0597 mL | 0.2987 mL | 0.5975 mL | 1.4936 mL | |
| 50 mM | 0.0478 mL | 0.2390 mL | 0.4780 mL | 1.1949 mL | |
| 60 mM | 0.0398 mL | 0.1992 mL | 0.3983 mL | 0.9958 mL | |
| 80 mM | 0.0299 mL | 0.1494 mL | 0.2987 mL | 0.7468 mL | |
| 100 mM | 0.0239 mL | 0.1195 mL | 0.2390 mL | 0.5975 mL |