Sonlicromanol hydrochloride
Based on 1 Customer Validation
Sonlicromanol (KH176) hydrochloride, a chemical entity derivative of Trolox, is a blood-brain barrier permeable ROS-redox modulator. Sonlicromanol (KH176) hydrochloride is used in the study for mitochondrial disorders.
商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。
- 純度: 99.71%
- CAS 番号: 2162149-24-6
- 分子式: C19H29ClN2O3
- 分子量:368.90
-
保管条件:
4°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
生物活性
製品説明
体内実験
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Ndufs4−/− mice (Leigh Disease model)[1].
-
Dosage:10 mg/kg.
-
Administration:IP, daily (PD14-PD45, 32 days).
-
Result:Significantly improve rotarod and gait performance and reduced the degeneration of retinal ganglion cells.
Resulted in statistically significantly higher FA values in the external capsule and a similar trend was found in the cerebral peduncle.
化学情報
-
CAS 番号 2162149-24-6
-
性状 Solid
-
分子量 368.90
-
分子式 C19H29ClN2O3
-
Color White to yellow
-
SMILES
CC1=C(C(C)=C2CC[C@@](C(N[C@@H]3CCCNC3)=O)(OC2=C1C)C)O.[H]Cl
-
別名
KH176 hydrochloride
-
輸送条件
Room temperature in continental US; may vary elsewhere.
-
保管条件
4°C, protect from light, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)
溶剤 & 溶解度
体外:
DMSO : 170 mg/mL (460.83 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : ≥ 100 mg/mL (271.08 mM)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
体内:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 4.25 mg/mL (11.52 mM); Clear solution
This protocol yields a clear solution of ≥ 4.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (42.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 4.25 mg/mL (11.52 mM); Clear solution
This protocol yields a clear solution of ≥ 4.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (42.5 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
純度とドキュメンテーション
-
データシート (272 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
取扱説明書 (2659 KB)
参考文献
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 2.7108 mL | 13.5538 mL | 27.1076 mL | 67.7690 mL |
| 5 mM | 0.5422 mL | 2.7108 mL | 5.4215 mL | 13.5538 mL | |
| 10 mM | 0.2711 mL | 1.3554 mL | 2.7108 mL | 6.7769 mL | |
| 15 mM | 0.1807 mL | 0.9036 mL | 1.8072 mL | 4.5179 mL | |
| 20 mM | 0.1355 mL | 0.6777 mL | 1.3554 mL | 3.3885 mL | |
| 25 mM | 0.1084 mL | 0.5422 mL | 1.0843 mL | 2.7108 mL | |
| 30 mM | 0.0904 mL | 0.4518 mL | 0.9036 mL | 2.2590 mL | |
| 40 mM | 0.0678 mL | 0.3388 mL | 0.6777 mL | 1.6942 mL | |
| 50 mM | 0.0542 mL | 0.2711 mL | 0.5422 mL | 1.3554 mL | |
| 60 mM | 0.0452 mL | 0.2259 mL | 0.4518 mL | 1.1295 mL | |
| 80 mM | 0.0339 mL | 0.1694 mL | 0.3388 mL | 0.8471 mL | |
| 100 mM | 0.0271 mL | 0.1355 mL | 0.2711 mL | 0.6777 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.