Telomerase-IN-2
Based on 1 Customer Validation
Telomerase-IN-2 is a telomerase inhibitor, and inhibits telomerase activity by decreasing expression of dyskerin, with an IC50 of 0.89 µM. Anti-cancer activity.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.29%
- CAS. Nr.: 1610878-54-0
- Formel: C34H39N3O9
- Molecular Weight:633.69
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
Biologische Aktivität
IC50: 0.89 µM (Telomerase)[1]
Chemical Information
-
CAS. Nr. 1610878-54-0
-
Appearance Solid
-
Molecular Weight 633.69
-
Formel C34H39N3O9
-
Color White to off-white
-
SMILES
O=C1C(OCCCCN2CCN(C(C3=CC=NC=C3)=O)CC2)=C(C4=CC(OC)=C(OC)C(OC)=C4)OC5=CC(OC)=CC(OC)=C15
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Lösungsmittel & Löslichkeit
DMSO : 250 mg/mL (394.51 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (3.28 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (271 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.5781 mL | 7.8903 mL | 15.7806 mL | 39.4515 mL |
| 5 mM | 0.3156 mL | 1.5781 mL | 3.1561 mL | 7.8903 mL | |
| 10 mM | 0.1578 mL | 0.7890 mL | 1.5781 mL | 3.9451 mL | |
| 15 mM | 0.1052 mL | 0.5260 mL | 1.0520 mL | 2.6301 mL | |
| 20 mM | 0.0789 mL | 0.3945 mL | 0.7890 mL | 1.9726 mL | |
| 25 mM | 0.0631 mL | 0.3156 mL | 0.6312 mL | 1.5781 mL | |
| 30 mM | 0.0526 mL | 0.2630 mL | 0.5260 mL | 1.3150 mL | |
| 40 mM | 0.0395 mL | 0.1973 mL | 0.3945 mL | 0.9863 mL | |
| 50 mM | 0.0316 mL | 0.1578 mL | 0.3156 mL | 0.7890 mL | |
| 60 mM | 0.0263 mL | 0.1315 mL | 0.2630 mL | 0.6575 mL | |
| 80 mM | 0.0197 mL | 0.0986 mL | 0.1973 mL | 0.4931 mL | |
| 100 mM | 0.0158 mL | 0.0789 mL | 0.1578 mL | 0.3945 mL |