Thr101
Based on 1 Customer Validation
Thr101 is an inhibitor (IC50=2.9 μM) of phosphomannose isomerase (PMI).PMI can compete with phosphomannose mutase 2 (PMM2) for the binding site of Man-6-P and convert mannose-6-phosphate (Man-6-P) into fructose-6-phosphate (Fru-6-P) .Thr101 only specifically inhibits PMI and not PMM2. Thr101 can be used for research of congenital disorder of glycosylation type Ia (CDG-Ia).
For research use only. We do not sell to patients.
- Purity: 99.48%
- CAS No.: 727664-79-1
- Formula: C14H10FNOS
- Molecular Weight:259.30
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
Biological Activity
ic50: 2.9 μM (Phosphomannose isomerase, PMI)[1]
Chemical Information
-
CAS No. 727664-79-1
-
Appearance Solid
-
Molecular Weight 259.30
-
Formula C14H10FNOS
-
Color Off-white to yellow
-
SMILES
O=C1N(SC2=CC(F)=CC=C12)C3=CC=CC=C3C
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 100 mg/mL (385.65 mM; ultrasonic and warming and heat to 80°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 5 mg/mL (19.28 mM); Clear solution; Need ultrasonic and warming and heat to 160°C
This protocol yields a clear solution of 5 mg/mL.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (272 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.8565 mL | 19.2827 mL | 38.5654 mL | 96.4134 mL |
| 5 mM | 0.7713 mL | 3.8565 mL | 7.7131 mL | 19.2827 mL | |
| 10 mM | 0.3857 mL | 1.9283 mL | 3.8565 mL | 9.6413 mL | |
| 15 mM | 0.2571 mL | 1.2855 mL | 2.5710 mL | 6.4276 mL | |
| 20 mM | 0.1928 mL | 0.9641 mL | 1.9283 mL | 4.8207 mL | |
| 25 mM | 0.1543 mL | 0.7713 mL | 1.5426 mL | 3.8565 mL | |
| 30 mM | 0.1286 mL | 0.6428 mL | 1.2855 mL | 3.2138 mL | |
| 40 mM | 0.0964 mL | 0.4821 mL | 0.9641 mL | 2.4103 mL | |
| 50 mM | 0.0771 mL | 0.3857 mL | 0.7713 mL | 1.9283 mL | |
| 60 mM | 0.0643 mL | 0.3214 mL | 0.6428 mL | 1.6069 mL | |
| 80 mM | 0.0482 mL | 0.2410 mL | 0.4821 mL | 1.2052 mL | |
| 100 mM | 0.0386 mL | 0.1928 mL | 0.3857 mL | 0.9641 mL |
Powered by Bioz