trans-2-Heptenal
Based on 1 Customer Validation
trans-2-Heptenal is a biochemical reagent that can be used as a biological material or organic compound for life science related research.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 98.0%
- CAS. Nr.: 18829-55-5
- Formel: C7H12O
- Molecular Weight:112.17
-
Speicherung:Pure form -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
-
Help & FAQs
Biologische Aktivität
Chemical Information
-
CAS. Nr. 18829-55-5
-
Appearance Liquid (Density: 0.857 g/cm3)
-
Molecular Weight 112.17
-
Formel C7H12O
-
Color Colorless to light yellow
-
SMILES
CCCC/C=C/C=O
-
Synonyms
beta-Butylacrolein
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Pure form -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Lösungsmittel & Löslichkeit
DMSO : 100 mg/mL (891.50 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5 mg/mL (44.58 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (238 KB)
-
SDS (634 KB)
- English - EN (634 KB)
- Français - FR (634 KB)
- Deutsch - DE (634 KB)
- Norwegian - NO (634 KB)
- Español - ES (634 KB)
- Swedish - SV (634 KB)
- Italian - IT (634 KB)
- Korean - KR (634 KB)
- Portuguese - PT (634 KB)
-
Handling Instructions (2659 KB)
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 8.9150 mL | 44.5752 mL | 89.1504 mL | 222.8760 mL |
| 5 mM | 1.7830 mL | 8.9150 mL | 17.8301 mL | 44.5752 mL | |
| 10 mM | 0.8915 mL | 4.4575 mL | 8.9150 mL | 22.2876 mL | |
| 15 mM | 0.5943 mL | 2.9717 mL | 5.9434 mL | 14.8584 mL | |
| 20 mM | 0.4458 mL | 2.2288 mL | 4.4575 mL | 11.1438 mL | |
| 25 mM | 0.3566 mL | 1.7830 mL | 3.5660 mL | 8.9150 mL | |
| 30 mM | 0.2972 mL | 1.4858 mL | 2.9717 mL | 7.4292 mL | |
| 40 mM | 0.2229 mL | 1.1144 mL | 2.2288 mL | 5.5719 mL | |
| 50 mM | 0.1783 mL | 0.8915 mL | 1.7830 mL | 4.4575 mL | |
| 60 mM | 0.1486 mL | 0.7429 mL | 1.4858 mL | 3.7146 mL | |
| 80 mM | 0.1114 mL | 0.5572 mL | 1.1144 mL | 2.7859 mL | |
| 100 mM | 0.0892 mL | 0.4458 mL | 0.8915 mL | 2.2288 mL |
trans-2-Heptenal Related Classifications
HY-W127398 Related Classifications
Powered by Bioz