1-Fluoronaphthalene
Based on 1 Customer Validation
1-Fluoronaphthalene is an organofluorine compound derived from naphthalene derivatives and fluorinated aromatics. 1-Fluoronaphthalene can be used to synthesize LY248686, a potent inhibitor of serotonin and noradrenaline uptake.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.56%
- CAS. Nr.: 321-38-0
- Formel: C10H7F
- Molecular Weight:146.16
-
Speicherung:Pure form -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
-
HY-32126R
1-Fluoronaphthalene (Standard)
-
HY-109540
Perfluorohexane
-
HY-W008137
5-Bromo-2-fluoropyrimidine
-
HY-W005148
3-Amino-2-naphthoic acid
-
HY-32748
2-Bromo-5-fluoropyridine
-
HY-W015753
3-Fluorobenzoic acid
-
HY-Y0075
2-Naphthaldehyde
-
HY-W002068
2,4-Difluorobenzoic acid
-
HY-32746
5-Bromo-2-fluoropyridine
-
HY-Y1747
4-Bromo-2,6-difluorobenzaldehyde
-
HY-Y0680
3-Chloro-4-fluoroaniline
-
HY-Y0805R
3,4-Difluorobenzaldehyde (Standard)
Biologische Aktivität
1-Fluoronaphthalene (3 mg, 24 h) can be oxidized by C.elegans ATCC 36112 to form trans-3,4-dihydroxy-3,4-dihydro-1-fluoronaphthalene and trans-5,6-dihydroxy-5,6-dihydro-1-fluoronaphthalene and to form 1-fluoro-8-hydroxy-5-tetralone, 5-hydroxy-1-fluoronaphthalene and 4-hydroxy-1-fluoronaphthalene as well as glucosides, sulfates and glucuronide conjugates of these phenols[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS. Nr. 321-38-0
-
Appearance Liquid (Density: 1.1339 g/cm3)
-
Molecular Weight 146.16
-
Formel C10H7F
-
Color Colorless to yellow
-
SMILES
FC1=C(C=CC=C2)C2=CC=C1
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Pure form -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Lösungsmittel & Löslichkeit
DMSO : 100 mg/mL (684.16 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5 mg/mL (34.21 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 5 mg/mL (34.21 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (276 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 6.8416 mL | 34.2081 mL | 68.4163 mL | 171.0407 mL |
| 5 mM | 1.3683 mL | 6.8416 mL | 13.6833 mL | 34.2081 mL | |
| 10 mM | 0.6842 mL | 3.4208 mL | 6.8416 mL | 17.1041 mL | |
| 15 mM | 0.4561 mL | 2.2805 mL | 4.5611 mL | 11.4027 mL | |
| 20 mM | 0.3421 mL | 1.7104 mL | 3.4208 mL | 8.5520 mL | |
| 25 mM | 0.2737 mL | 1.3683 mL | 2.7367 mL | 6.8416 mL | |
| 30 mM | 0.2281 mL | 1.1403 mL | 2.2805 mL | 5.7014 mL | |
| 40 mM | 0.1710 mL | 0.8552 mL | 1.7104 mL | 4.2760 mL | |
| 50 mM | 0.1368 mL | 0.6842 mL | 1.3683 mL | 3.4208 mL | |
| 60 mM | 0.1140 mL | 0.5701 mL | 1.1403 mL | 2.8507 mL | |
| 80 mM | 0.0855 mL | 0.4276 mL | 0.8552 mL | 2.1380 mL | |
| 100 mM | 0.0684 mL | 0.3421 mL | 0.6842 mL | 1.7104 mL |
1-Fluoronaphthalene Related Classifications
HY-32126 Related Classifications
Powered by Bioz