3,5-Dihydroxybenzaldehyde
Based on 1 Customer Validation
3,5-Dihydroxybenzaldehyde is a dihydroxy benzaldehyde.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.99%
- CAS. Nr.: 26153-38-8
- Formel: C7H6O3
- Molecular Weight:138.12
-
Speicherung:
4°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Biologische Aktivität
Chemical Information
-
CAS. Nr. 26153-38-8
-
Appearance Solid
-
Molecular Weight 138.12
-
Formel C7H6O3
-
Color Light brown to gray
-
SMILES
O=CC1=CC(O)=CC(O)=C1
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
4°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
Lösungsmittel & Löslichkeit
DMSO : 100 mg/mL (724.01 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 5 mg/mL (36.20 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (271 KB)
-
SDS (394 KB)
- English - EN (394 KB)
- Français - FR (394 KB)
- Deutsch - DE (394 KB)
- Norwegian - NO (394 KB)
- Español - ES (394 KB)
- Swedish - SV (394 KB)
- Italian - IT (394 KB)
- Korean - KR (394 KB)
- Portuguese - PT (394 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 7.2401 mL | 36.2004 mL | 72.4008 mL | 181.0020 mL |
| 5 mM | 1.4480 mL | 7.2401 mL | 14.4802 mL | 36.2004 mL | |
| 10 mM | 0.7240 mL | 3.6200 mL | 7.2401 mL | 18.1002 mL | |
| 15 mM | 0.4827 mL | 2.4134 mL | 4.8267 mL | 12.0668 mL | |
| 20 mM | 0.3620 mL | 1.8100 mL | 3.6200 mL | 9.0501 mL | |
| 25 mM | 0.2896 mL | 1.4480 mL | 2.8960 mL | 7.2401 mL | |
| 30 mM | 0.2413 mL | 1.2067 mL | 2.4134 mL | 6.0334 mL | |
| 40 mM | 0.1810 mL | 0.9050 mL | 1.8100 mL | 4.5251 mL | |
| 50 mM | 0.1448 mL | 0.7240 mL | 1.4480 mL | 3.6200 mL | |
| 60 mM | 0.1207 mL | 0.6033 mL | 1.2067 mL | 3.0167 mL | |
| 80 mM | 0.0905 mL | 0.4525 mL | 0.9050 mL | 2.2625 mL | |
| 100 mM | 0.0724 mL | 0.3620 mL | 0.7240 mL | 1.8100 mL |
3,5-Dihydroxybenzaldehyde Related Classifications
HY-W007416 Related Classifications
Powered by Bioz