(S)-Purvalanol B
Based on 1 Customer Validation
(S)-Purvalanol B is the S enantiomer of Purvalanol B. Purvalanol B is a cyclin-dependent kinase inhibitor.
For research use only. We do not sell to patients.
- Purity: 98.0%
- CAS No.: 2310135-61-4
- Formula: C20H25ClN6O3
- Molecular Weight:432.90
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
Biological Activity
Chemical Information
-
CAS No. 2310135-61-4
-
Appearance Solid
-
Molecular Weight 432.90
-
Formula C20H25ClN6O3
-
Color White to off-white
-
SMILES
O=C(O)C1=CC=C(NC2=C3N=CN(C(C)C)C3=NC(N[C@H](CO)C(C)C)=N2)C=C1Cl
-
Synonyms
(S)-NG 95
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 76.7 mg/mL (177.18 mM; Need ultrasonic and warming; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (4.80 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (273 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.3100 mL | 11.5500 mL | 23.1000 mL | 57.7501 mL |
| 5 mM | 0.4620 mL | 2.3100 mL | 4.6200 mL | 11.5500 mL | |
| 10 mM | 0.2310 mL | 1.1550 mL | 2.3100 mL | 5.7750 mL | |
| 15 mM | 0.1540 mL | 0.7700 mL | 1.5400 mL | 3.8500 mL | |
| 20 mM | 0.1155 mL | 0.5775 mL | 1.1550 mL | 2.8875 mL | |
| 25 mM | 0.0924 mL | 0.4620 mL | 0.9240 mL | 2.3100 mL | |
| 30 mM | 0.0770 mL | 0.3850 mL | 0.7700 mL | 1.9250 mL | |
| 40 mM | 0.0578 mL | 0.2888 mL | 0.5775 mL | 1.4438 mL | |
| 50 mM | 0.0462 mL | 0.2310 mL | 0.4620 mL | 1.1550 mL | |
| 60 mM | 0.0385 mL | 0.1925 mL | 0.3850 mL | 0.9625 mL | |
| 80 mM | 0.0289 mL | 0.1444 mL | 0.2888 mL | 0.7219 mL | |
| 100 mM | 0.0231 mL | 0.1155 mL | 0.2310 mL | 0.5775 mL |
(S)-Purvalanol B Related Classifications
HY-18299B Related Classifications
Powered by Bioz