Amcasertib
Based on 1 Customer Validation
Amcasertib (BBI503) is an orally activate cancer stemness kinase inhibitor that enhances apoptosis. Amcasertib inhibits the expression of NANOG and CD133 and cell viability in PC-9/GR cells.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 98.03%
- CAS. Nr.: 1129403-56-0
- Formel: C31H33N5O2S
- Molecular Weight:539.69
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
Biologische Aktivität
Amcasertib (0-1μM; 48h) inhibits the NANOG and CD133 expression in PC-9/GR cells. Amcasertib also significantly suppresses the growth of PC-9/GR cells in a dose-dependent manner[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:PC-9/GR cell
-
Concentration:0, 0.3125, 0.625, 1.25, 2.5, 5 and 10μM
-
Incubation Time:48 hours
-
Result:Suppressed the growth of PC-9/GR cells in a dose-dependent manner for 48 hours with a OD value decreased from over 1.5 to less than 0.2 (p< 0.0001).
-
Cell Line:PC-9/GR cell
-
Concentration:0, 0.1 and 1μM
-
Incubation Time:48 hours
-
Result:Inhibited the NANOG and CD133 expression in PC-9/GR cells.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS. Nr. 1129403-56-0
-
Appearance Solid
-
Molecular Weight 539.69
-
Formel C31H33N5O2S
-
Color Light yellow to yellow
-
SMILES
O=C(C1=C(C)NC(/C=C2C(NC3=C/2C=C(C4=CSC(C5=CC=CC=C5)=N4)C=C3)=O)=C1C)NCCN(CC)CC
-
Synonyms
BBI503
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Lösungsmittel & Löslichkeit
DMSO : ≥ 30 mg/mL (55.59 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 1.25 mg/mL (2.32 mM); Clear solution
This protocol yields a clear solution of ≥ 1.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (279 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.8529 mL | 9.2646 mL | 18.5292 mL | 46.3229 mL |
| 5 mM | 0.3706 mL | 1.8529 mL | 3.7058 mL | 9.2646 mL | |
| 10 mM | 0.1853 mL | 0.9265 mL | 1.8529 mL | 4.6323 mL | |
| 15 mM | 0.1235 mL | 0.6176 mL | 1.2353 mL | 3.0882 mL | |
| 20 mM | 0.0926 mL | 0.4632 mL | 0.9265 mL | 2.3161 mL | |
| 25 mM | 0.0741 mL | 0.3706 mL | 0.7412 mL | 1.8529 mL | |
| 30 mM | 0.0618 mL | 0.3088 mL | 0.6176 mL | 1.5441 mL | |
| 40 mM | 0.0463 mL | 0.2316 mL | 0.4632 mL | 1.1581 mL | |
| 50 mM | 0.0371 mL | 0.1853 mL | 0.3706 mL | 0.9265 mL |