Evacetrapib
Based on 4 publication(s) in Google Scholar
Evacetrapib is a potent and selective of CETP inhibitor, which inhibits human recombinant CETP protein (IC50 5.5 nM) and CETP activity in human plasma (IC50 36 nM) in vitro.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.38%
- CAS. Nr.: 1186486-62-3
- Formel: C31H36F6N6O2
- Molecular Weight:638.65
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Protokoll
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
-
Metabolism/Protease Compound Library
HY-L012
-
Clinical Compound Library
HY-L026
-
Drug Repurposing Compound Library
HY-L035
-
Anti-diabetic Compound Library
HY-L040
-
Anti-Cardiovascular Disease Compound Library
HY-L046
-
Lipid Metabolism Compound Library
HY-L091
-
Targeted Diversity Library
HY-L099
-
Human Metabolite Library
HY-L123
-
Metabolic Enzyme Compound Library
HY-L146
-
Highly Selective Inhibitors Library
HY-L158
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Drug Repurposing Compound Library Plus
HY-L035P
-
Clinical Compound Library Plus
HY-L026P
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
-
Mass Spectrometry Human Metabolite Library
HY-L215
Publications Citing Use of MedChemExpress (MCE) Evacetrapib
More
Customer Validation & Images
-
WB
Biologische Aktivität
IC50: 5.5 nM (CETP)[1]
Evacetrapib is a novel benzazepine-based CETP inhibitor. In the buffer CETP assay, the absolute potency of the compound is 5.5 nM. In the human plasma CETP assay, the CETP concentration is about 2 μg/mL (25 nM) and the 36 nM IC50 value again indicates that Evacetrapib is a potent CETP inhibitor against either the recombinant protein or CETP from human plasma. Evacetrapib is apparently much more potent than Dalcetrapib[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
| NCT Number | Sponsor | Condition | Start Date |
Phase
|
|---|---|---|---|---|
| NCT01329991 | Plexxikon| | 2011-05 | PHASE1 |
Chemical Information
-
CAS. Nr. 1186486-62-3
-
Appearance Solid
-
Molecular Weight 638.65
-
Formel C31H36F6N6O2
-
Color White to light yellow
-
SMILES
O=C([C@H]1CC[C@H](CN2CCC[C@H](N(CC3=CC(C(F)(F)F)=CC(C(F)(F)F)=C3)C4=NN(C)N=N4)C5=CC(C)=CC(C)=C52)CC1)O
-
Synonyms
LY2484595
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (4)
-
Journal Impact Factor
-
Most Recent
-
Atherosclerosis
CETP inhibitors downregulate hepatic LDL receptor and PCSK9 expression in vitro and in vivo through a SREBP2 dependent mechanism. [Abstract]2014 Aug;235(2):449-62. PMID: 24950000
Evacetrapib purchased from MedChemExpress. Usage Cited in: Atherosclerosis. 2014 Aug;235(2):449-62. [Abstract]
Downregulation of SREBP2-M by EVA and TOR reduced LDLR and PCSK9 expression. HepG2 cells are treated with EVA at indicated concentrations for 24 h. Total cell lysates (30 µg) are analyzed for the protein abundance of LDLR and β-actin. Nuclear and cytoplasmic extracts are isolated from each sample. Nuclear extracts of 30 µg protein per sample are used to detect SREBP2-M. The membrane is reprobed with anti-HDAC1. Cytoplasmic extracts of 30 µg protein per sample are used to detect SREBP2-P. The mem
-
JCI Insight
2025 Sep 30:e191697. PMID: 41026531 -
J Virol
The cholesterol transporter Niemann-Pick C1 facilitates the entry of porcine epidemic diarrhea coronavirus. [Abstract]2026 Jun 9:e0030126. PMID: 42262129 -
PLoS One
Comparative studies of three cholesteryl ester transfer proteins and their interactions with known inhibitors. [Abstract]2017 Aug 2;12(8):e0180772. PMID: 28767652
Lösungsmittel & Löslichkeit
DMSO : ≥ 100 mg/mL (156.58 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (3.91 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protokoll
Human CETP cDNA is amplified from a human liver cDNA library and the sequence is confirmed to be identical to the published sequence. The cDNA is subcloned into a pcDNA3.1 vector, under the control of CMV promoter. A stable line is established in CV1 cells in which the above-mentioned construct is used to express the recombinant human CETP. The medium contained the secreted recombinant CETP protein and the amount (19 ng/μL) is quantified by an ELISA kit. The medium is then aliquoted in 0.2% BSA and stored at -80°C. The stock CETP protein is diluted 150-fold in CETP buffer (10 mM Tris, 150 mM NaCl, and 2 mM EDTA) before use. The assay is set up in a 96-well plate. Each well received 97.5 μL diluted CETP protein (final concentration 7 nM) and 2.5 μL of compound stock. After a 30 min incubation at 37°C, 5 μL of substrate stock (the same stock used in the human plasma CETP assay), 0.16 μL of VLDL stock (2.5 mg/mL, Intracel) and 145 μL of CETP buffer are added, and the incubation is continued for another 4 h. Signal is read for the human plasma CETP assay[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Rats[1]
The blood pressure study is carried out using telemetered, male, obese Zucker Diabetic rats (ZDF fa/fa rats, 8 weeks of age on arrival; n=4). All rats underwent surgical implantation of a telemetry transmitter for continuous monitoring of hemodynamic parameters throughout the study. The rats are acclimated on Purina 5008 chow and house water ad libitum until 11 weeks of age. Mean daily blood pressure for the 24-h period immediately prior to administration of compound is taken as the baseline blood pressure. On the day of an experiment, a single 160 mg/kg dose (in 10% acacia) of Evacetrapib as the lysine salt is administered by oral gavage, and the drug effect is taken as the average daily mean arterial pressure (MAP) during the 24 h period following the dose. Data are expressed as the change in MAP from baseline. Following the last day of blood pressure monitoring, samples are collected from the orbital sinus at 1, 2, 4, 8, and 24 h post dose into tubes containing EDTA and processed into plasma. Plasma concentrations of Evacetrapib are measured using liquid chromatography tandem mass spectrometry.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Reinheit & Dokumentation
-
Data Sheet (281 KB)
-
SDS (604 KB)
- English - EN (604 KB)
- Français - FR (604 KB)
- Deutsch - DE (604 KB)
- Norwegian - NO (604 KB)
- Español - ES (604 KB)
- Swedish - SV (604 KB)
- Italian - IT (604 KB)
- Korean - KR (604 KB)
- Portuguese - PT (604 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.5658 mL | 7.8290 mL | 15.6580 mL | 39.1451 mL |
| 5 mM | 0.3132 mL | 1.5658 mL | 3.1316 mL | 7.8290 mL | |
| 10 mM | 0.1566 mL | 0.7829 mL | 1.5658 mL | 3.9145 mL | |
| 15 mM | 0.1044 mL | 0.5219 mL | 1.0439 mL | 2.6097 mL | |
| 20 mM | 0.0783 mL | 0.3915 mL | 0.7829 mL | 1.9573 mL | |
| 25 mM | 0.0626 mL | 0.3132 mL | 0.6263 mL | 1.5658 mL | |
| 30 mM | 0.0522 mL | 0.2610 mL | 0.5219 mL | 1.3048 mL | |
| 40 mM | 0.0391 mL | 0.1957 mL | 0.3915 mL | 0.9786 mL | |
| 50 mM | 0.0313 mL | 0.1566 mL | 0.3132 mL | 0.7829 mL | |
| 60 mM | 0.0261 mL | 0.1305 mL | 0.2610 mL | 0.6524 mL | |
| 80 mM | 0.0196 mL | 0.0979 mL | 0.1957 mL | 0.4893 mL | |
| 100 mM | 0.0157 mL | 0.0783 mL | 0.1566 mL | 0.3915 mL |
Evacetrapib Related Classifications
HY-13327 Related Classifications
Powered by Bioz