MKC9989
Based on 1 publication(s) in Google Scholar
MKC9989 is a Hydroxy aryl aldehydes (HAA) inhibitor and also inhibits IRE1α with an IC50 of 0.23 to 44 μM.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 98.33%
- CAS. Nr.: 1338934-20-5
- Formel: C17H20O7
- Molecular Weight:336.34
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Protokoll
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
-
Cell Cycle/DNA Damage Compound Library
HY-L004
-
Kinase Inhibitor Library
HY-L009
-
Anti-Cancer Compound Library
HY-L025
-
Anti-Aging Compound Library
HY-L034
-
Covalent Screening Library
HY-L036
-
Endoplasmic Reticulum Stress Compound Library
HY-L054
-
Cysteine Targeted Covalent Library
HY-L153
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Covalent Screening Library Plus
HY-L036P
-
Bioactive Compound Library
HY-L001
-
Protein Kinase Compound Library
HY-L196
-
High-Throughput Bioactive Compound Library
HY-L205
-
Posttranslational Modification Library
HY-L226
Publications Citing Use of MedChemExpress (MCE) MKC9989
More
Biologische Aktivität
IC50: 0.23 to 44 μM (IRE1α)[1]
At 10 μM concentration, MKC9989 completely inhibits both basal and thapsigargin induced splicing of XBP1 mRNA. These effects are observed even in cells pre-treated with thapsigargin, indicating that MKC9989 can fully reverse the onset of XPB1 splicing after the UPR is initiated. In parallel analysis, MKC9989, significantly stabilizes the RIDD target CD59 mRNA when co-administered with thapsigargin relative to thapsigargin treatment alone and modestly increases levels of CD59 mRNA in non-stressed cells, the latter likely reflects the inhibition of baseline RIDD activity. In contrast to effects on XBP1 splicing, MKC9989 moderately stabilizes CD59 levels when administered 2 hour post treatment with thapsigargin. Finally, the potency of MKC9989 against the splicing of XBP1 mRNA (EC50=0.33 μM) is comparable to its potency against RNA cleavage in vitro[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS. Nr. 1338934-20-5
-
Appearance Solid
-
Molecular Weight 336.34
-
Formel C17H20O7
-
Color Light yellow to yellow
-
SMILES
O=CC1=C(O2)C(C(C)=C(CCOCCOC)C2=O)=CC(OC)=C1O
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Nat Commun
2024 May 15;15(1):4114. PMID: 38750057
Lösungsmittel & Löslichkeit
DMSO : ≥ 50 mg/mL (148.66 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (7.43 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protokoll
Human RPMI 8226 plasmacytoma cells are grown in monolayer culture using medium (DMEM) supplemented with 10% fetal calf serum (FCS) at 37°C and 5% CO2. MKC9989 is prepared as 10 mM stocks in DMSO, stored at -20°C, and diluted in medium. Thapsigargin (Tg) is resuspended in DMSO and diluted in medium. Cells are grown to 50% confluency, treated with 1 μM Tg and/or 10 μM MKC9989 at the indicated time points. After incubation of cells for the indicated periods, cells are harvested[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Reinheit & Dokumentation
-
Data Sheet (272 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.9732 mL | 14.8659 mL | 29.7318 mL | 74.3295 mL |
| 5 mM | 0.5946 mL | 2.9732 mL | 5.9464 mL | 14.8659 mL | |
| 10 mM | 0.2973 mL | 1.4866 mL | 2.9732 mL | 7.4330 mL | |
| 15 mM | 0.1982 mL | 0.9911 mL | 1.9821 mL | 4.9553 mL | |
| 20 mM | 0.1487 mL | 0.7433 mL | 1.4866 mL | 3.7165 mL | |
| 25 mM | 0.1189 mL | 0.5946 mL | 1.1893 mL | 2.9732 mL | |
| 30 mM | 0.0991 mL | 0.4955 mL | 0.9911 mL | 2.4777 mL | |
| 40 mM | 0.0743 mL | 0.3716 mL | 0.7433 mL | 1.8582 mL | |
| 50 mM | 0.0595 mL | 0.2973 mL | 0.5946 mL | 1.4866 mL | |
| 60 mM | 0.0496 mL | 0.2478 mL | 0.4955 mL | 1.2388 mL | |
| 80 mM | 0.0372 mL | 0.1858 mL | 0.3716 mL | 0.9291 mL | |
| 100 mM | 0.0297 mL | 0.1487 mL | 0.2973 mL | 0.7433 mL |
MKC9989 Related Classifications
HY-12399 Related Classifications
Powered by Bioz